Compressors for all applications - hobby and industrial, Page 8

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair FoodGrade oils:...

Original high quality lubricants for MARK screw compressors. Additives to ensure special properties and for perfect lubrication of the screw compressor. Rotair Plus Oils: heavy...

Genuine high quality mineral oil for SCR screw compressors in a 20 l canister. For oil change of SCR brand screw compressors - Shanghai Screw Compressor Co., Ltd

Professional V-belt reciprocating compressor with an output pressure of 10 bar designed especially for use in craft and professional applications. Mobile oil-lubricated version...

Separate replacement oil sight glass for compressor with 1" male pipe thread. Anodized aluminium star with a red dot in the middle for better contrast. Material : transparent...

Mineral oil 5 l for lubrication of ABAC piston compressors industrial environment with continuous operation. Compressors with cast iron cylinders. Mineral design. Branded...

Mineral oil 0,25 l for lubrication of ABAC low load piston compressors

Synthetic oil 5 l for lubrication of ABAC reciprocating compressors industrial environment with continuous operation; compressors with cast iron cylinders. Synthetic design....

Inexpensive oil-free reciprocating compressor with an output pressure of 8 bar designed especially for occasional use in craft applications and for home use. The oil-free design...

Professional piston compressor with V-belts with an output pressure of 10 bar designed for use in craft and professional applications. Mobile oil-lubricated design with a motor...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 2 000 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

Innovative and economical small screw compressor for up to 50% energy savings. Maximum output 950 l/min at 10 bar. Continuous speed control by frequency converter, direct 1:1...

The most sensible 3-in-1 package: 510 l/min with a dryer and a 200 l receiver. The best output-to-input ratio in the range, weight 279 kg.

The most powerful 3-in-1 package without filtration — 696 l/min, dryer and 200 l receiver. Twice the entry 3 kW on the same footprint.

The highest output in the range in the shorter package. Two thousand litres a minute, but only 1,517 mm long — for plants short of space in the compressor room.

Compressor, a 200 l receiver and a refrigerant dryer in one unit. Dry air with a +5 °C dew point right at the outlet, with nothing extra in the line. Output 498 l/min, noise 60...

The best output-to-input ratio in the range: 8 % more power than the 3 kW but 59 % more air. 510 l/min, same enclosure and weight.

The smallest and quietest machine in the range. It controls from 600 to 950 l/min at 66 dB(A) and takes up only 890 × 720 mm — four decibels less and a smaller footprint than...

A standalone 18.5 kW screw compressor delivering 2,590 l/min at 10 bar. It adds 375 litres per minute over the 15 kW and gives up 500 against the 22 kW — sitting exactly between...

The smallest in the SPINN Mini range and the cheapest way to leave a piston compressor behind in your workshop. The 2.2 kW motor delivers 294 l/min at 10 bar, that is 17.7 m³/h...

The choice for a workshop that has outgrown the entry model. The three-kilowatt motor delivers 366 l/min at 10 bar — a quarter more air than the SPM-2,2, yet the noise stays at...

The first model in the range that can handle tools drawing air continuously — grinders, sandblasting guns, longer blasting jobs. The four-kilowatt motor delivers 516 l/min at 10...

The most powerful machine in the SPINN Mini range: 780 l/min at 10 bar, which is 2.65 times the output of the entry model. It handles a spray gun and several workstations at...

The middle one of the three standalone units. It delivers 1,416 l/min at 10 bar, 420 l/min more than the 7.5 kW — and from the same 850 × 720 mm canopy. Noise 69 dB(A).

An eleven-kilowatt set with a 500-litre receiver and a refrigerant dryer. 1,416 l/min at 10 bar, 69 dB(A). Dry air for pipework serving several people at once.

The strongest standalone unit in the range. 1,680 l/min at 10 bar from a fifteen-kilowatt motor, noise 71 dB(A). The canopy stays 850 × 720 mm as on the weaker models.

The best-equipped set in the range. A fifteen-kilowatt compressor, a 500-litre receiver and a refrigerant dryer in one frame. 1,680 l/min at 10 bar, 71 dB(A), weight 300 kg.

The smallest complete set in the range: compressor, 270-litre receiver and refrigerant dryer in one frame. 696 l/min at 10 bar, 64 dB(A) — the quietest machine in the range. Dry...

Compressor, 500-litre receiver and refrigerant dryer in one unit. 996 l/min at 10 bar, 7.5 kW, 65 dB(A). Dry air and a reserve for peak demand without assembling a set.

The 4 kW regulates from 270 to 503 l/min at 58 dB(A). It feeds two or three pneumatic tools at once and drops back when demand falls instead of idling. 200 l receiver with dryer.

The strongest in the range. It regulates from 337 to 757 l/min, the widest range of all four models. It feeds several workstations at once. 200 l receiver, refrigerant dryer, 61...

The smallest machine at the top equipment level. It turns down to 130 l/min and up to 320, yet does everything the larger assemblies do — two-stage filtration, automatic...

The middle machine at the top equipment level. A 200–510 l/min range covers a workshop with several stations, and adds two-stage filtration, automatic condensate drainage and a...