Air compressors, Page 20
-
Black Wind piston compressors
-
ATMOS piston compressors
-
Walter reciprocating compressors
-
Piston compressors ABAC
-
Piston compressors ABAC
-
Expert Zero compressors
-
ABAC reciprocating compressors
-
Quiet compressors Super Silent OS
-
INDUSTRIAL TECH compressors
-
CLR reciprocating compressors
-
Combustion compressors
-
Screw compressors
-
Pressure vessels
-
Compressor accessories
.png)
Product sorting
List of products
A manual condensate drain for filters, pressure vessels and cyclone separators. Stainless steel build, with no electronics and no moving parts that could seize.
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary design with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary design with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary version with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary version with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary design with a motor...
Oil-free compressor with an output pressure of 10 bar for use as an oil-free air source with TÜV certification according to ISO 8573-1 class 0. Stationary version with a motor...
The lightest low-speed V-twin in the V30 range: 20 l tank in a protective tubular frame, 2.2 kW from an ordinary socket, 1,450 rpm, 330 l/min displacement, 10 bar, 43 kg....
Low-speed V-twin compressor with the biggest tank in the V30 range: horizontal 90 l tank, 2.2 kW from an ordinary socket, 1,450 rpm, 330 l/min displacement, 10 bar, 72 kg on...
The smallest machine of the range on a steel base frame with a control box. Ready to be anchored to the floor or set on anti-vibration mounts, with no further assembly. It...
The smallest machine in the series as a bare unit with motor on a common base plate, without frame and without a tank — for integration into your own installation. At 45...
Two point two kilowatts on a steel base frame with a control box. The strongest machine of the range that still starts directly, without a star-delta sequence.
Bare unit with a motor rated at an input of two point two kilowatts. Sixty litres more air than the smallest machine in the range, with the same footprint and only four...
A complete assembly: an oil-free airend mounted on a horizontal pressure vessel that doubles as its base. The machine arrives assembled — it only has to be placed and connected.
Four kilowatts on a steel base frame with a control box and star-delta starting. Twice the air of the 2.2 kW machine for seven kilograms more.
Five and a half kilowatts on a steel base frame, with star-delta starting. The largest machine of the range that comes ready mounted on a frame.
The most powerful machine in the series. Supplied as a bare unit with motor, with star-delta starting — for your own installation or integration into an existing setup.
A vertical twenty-four-litre tank takes up less floor space than a horizontal one. Oil-free pump, 36 kg, wheels and a handle.
The lightest machine of the range — 32 kilos with wheels and a folding handle. A three-litre tank and a protective tubular frame; an industrial S1 motor in a version you can...
The most generous machine of the range on an ordinary socket: a hundred-litre tank, four pistons and 245 l/min. It weighs 76 kg but still has wheels and a handle.
The only machine of the range with a three-phase supply. Otherwise identical to the hundred-litre 230 V version — the same output, noise, weight and dimensions.
Two five-litre tanks under the frame keep the centre of gravity low. Four pistons in two units, 245 l/min and 50 kg — the best rolling machine of the three-kilowatt group.
The suction filter serves as protection against dirt entering the machine and should be replaced regularly. ATMOS compressors are supplied with suction filters as standard...
A twenty-litre canister of certified oil for food plants. The usual choice for one line with its own screw compressor.
An oil safe for incidental contact, certified NSF H1, halal and kosher. For plants where the compressed air meets the product.
A heavily additised oil with twice the interval of the basic Rotair. A five-litre canister for smaller machines or for topping up.
A drum of the top Rotair range. For plants with several machines running continuously in heat or in dust.
The top oil of the Rotair range in a five-litre canister. The only one the manufacturer allows into compressor rooms above 40 °C and into very dusty plants.
The most powerful machine in the range that fits under a low ceiling — the enclosure is 1,690 mm tall. 21,000 l/min at ten bar, regulation from 6,300.
The lowest enclosure of the large machines — 1,690 mm, 460 mm less than the 132 kW. Into a low compressor room it often fits as the only one. 24,500 l/min.
The smallest pressure penalty in the whole range: eight bar costs only 500 l/min against seven. 24,000 l/min, DN 80 outlet, weight 2,900 kg.
The most expensive pressure tax in the range: ten bar costs 23 % of the air here. It gives 23,000 l/min, but at seven bar that would be 7,000 l/min more.
The first machine in the range to pass thirty cubic metres a minute: 30,000 l/min. It weighs 3,050 kg, stands 2,150 mm tall and needs 25,000 m³/h of ventilation.
The backbone of a large compressor room — 28,000 l/min at eight bar holds the base demand while smaller machines come in at the peaks. The controller sequences up to sixteen.