Nuts for torque wrenches, Page 3
Bestsellers
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 250 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 13 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 15 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 17 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 19 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 20 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 8 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 17 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 17 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 18 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 20 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 9 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.
Hardened square reducer with a diameter of 25 mm and a height of 38 mm equipped with a ball. Inner square 1/2" with reduction to outer square 3/8".
Set of 14 nuts for impact wrenches with 1/2" clamping square. Standard height 38 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 27 mm. Hardened...
Set of 10 nuts for impact wrenches with 1/2" clamping square. Extended design for good handling in deep spaces. Dimensions in set - all sizes from 10 to 27 mm. Hardened steel...
Set of 11 nuts for impact wrenches with 1/2" clamping square. Standard height 38 - 42 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 32 mm in 1...
Set of 15 nuts for impact wrenches with 1/2" clamping square. Reduced height of only 28 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 24 mm in 1...
Hardened square reducer with 35 mm diameter and 48 mm height equipped with ball. Inner square 1/2" with reduction to outer square 3/4".