Pneu and Aku tools with gun technology, Page 7
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Bestsellers
Product sorting
List of products
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
The 1.7 mm nozzle set for SGHX100 APS is designed for thicker coatings such as fillers, 2K primers and more viscous materials. Provides higher flow rates, uniform spraying and...
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
The Mighty Seven DS-203 is a cordless impact driver and impact wrench in one, equipped with a top-of-the-line carbon-free motor. It offers an extremely high tightening and...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 32 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 35 mm screws.
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 0.4 - 1 kg. Aluminium body with lower cable outlet 1600 mm long and...
Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 4 - 6 kg. Aluminium body with 2000 mm long lower cable outlet and...
Hardened square reducer with a diameter of 25 mm and a height of 38 mm equipped with a ball. Inner square 1/2" with reduction to outer square 3/8".
The suction gun kit is used for extracting chips, dust and small dirt from work surfaces. Creating a vacuum from a stream of compressed air. Made of aluminium, equipped with 250...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 1 - 2 kg. Aluminium body with lower cable outlet 1600 mm long and...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
The M7 DB-1825 is a reliable and powerful 18V Li-ion battery that provides long life and consistent performance for all M7 platform tools. Thanks to modern Li-ion technology,...
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 3 kg. Aluminium body with lower cable outlet 1600 mm long and...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 23 mm screws.
Balancer type 9336 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 4 kg. Aluminium body with 2,500 mm lower cable outlet and rubber...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Cast aluminum body. The installed hook allows 360° rotation. Long...
Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 4 kg. Aluminium body with 2000 mm long lower cable outlet and...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 37 mm screws.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Balancer type 9320 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 1 - 2,5 kg. Aluminium body with 2,000 mm lower cable outlet and...
Hardened square reducer with a diameter of 44 mm and a height of 60 mm equipped with a ball. Inner square 3/4" with reduction to outer square 1".
Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 6 - 8 kg. Aluminium body with 2000 mm long lower cable outlet and...
The Mighty Seven DS-201 is a professional cordless impact driver with a compact design, up to 203 Nm of force and a 1/4" hexagonal chuck. Thanks to its powerful carbon-free...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 21 mm screws.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
The M7 DW-401 cordless impact wrench with 1/2" square drive offers a maximum tightening torque of 894 Nm. Thanks to the carbon-free motor and 3-stage speed adjustment, it...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 34 mm screws.
Robust all-metal blowgun with forged aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 32 mm screws.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Balancer type 933 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 4 - 6 kg. Aluminium body with 2,500 mm lower cable outlet and rubber...
Balancer type 933 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 6 - 8 kg. Aluminium body with 2,500 mm lower cable outlet and rubber...