Measurement of pressure and temperature of the medium, Page 10
-
Manometers; for measuring the pressure of a medium
-
Thermometers; for temperature measurement
-
Pressure sensors; pressure transducers and switches
Bestsellers
The WIKA copper thermometer sump serves as a stem protector with a length of 100 mm and a 1/2" connection with a stem diameter of 18 mm. Designed for WIKA TW and TST thermometers.
The WIKA DMUB pressure transducers with a range of 0 to 160 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
WIKA DMUB pressure transmitters with a range of 0 to 100 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65, input...
The WIKA DMUB pressure transducers with a range of 0 to 1.6 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65,...
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
Sealing ring made of aluminium for thread M20 × 1.5; G 1/2".
Pressure gauge for technical gas Oxygen with 63 mm gauge and pressure measurement range 0/40 bar with 2.5% deviation. Side connection 1/4". Suitable technical gases are intended...
The connection is equipped with two internal threads M12 × 1.5 and M12 × 1.5 left.
Aluminium thermometer TWALL with 63 mm diameter pointer and temperature range from 0 to 160°C. Rear version of the thermometer with a 100 mm long sump and 1/2" threaded...
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is stainless steel 1.4571.
The working pressure is 25 bar. Connection is G 1/2". The tap body is made of stainless steel 1.4571.
Precision manometer with 160 mm gauge and pressure measurement range 0/25 bar with a minimum deviation of 0.6%. Side connection 1/2". Suitable for demanding for accurate...
Rear stainless steel thermometer with connection for 100 mm stem length sump. 63 mm diameter with a temperature measurement range of -0°C to +120°C. Designed for measuring the...
The stainless steel thermometer sump with 1/2" thread serves as a protection for the 200 mm thermometer stem and as a connection element. Designed for WIKA TW and TST thermometers.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of steel.
Stainless steel gauge with 100 mm indicator with pressure measurement range 0/10 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...
The WIKA copper thermometer sump serves as a stem protector with a length of 160 mm and a 1/2" connection with a stem diameter of 18 mm. Designed for WIKA TW and TST thermometers.
The stainless steel sump with WIKA thermometer sleeve serves as a protection for the thermometer stem and as a connecting stem with a length of 100 mm. Designed for WIKA TW and...
The stainless steel sump with WIKA thermometer sleeve serves as a protection for the thermometer stem and as a connecting stem with a length of 160 mm. Designed for WIKA TW and...
The stainless steel thermometer sump with WIKA thermowell serves as a protection for the thermometer stem and as a connecting stem with a length of 63 mm. Designed for WIKA TW...
Panel mount adapter for MAKP digital pressure gauge.
The condensing loop has an M20×1.5 outer input and an M20×1.5 nut output. The body of the loop is made of steel.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is made of steel.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.
The condensing loop has M20×1.5 outer and M20×1.5 output nuts. The body of the loop is stainless steel 1.4571.
The condensing loop has a follower and an output M20 × 1.5 nut. The body of the loop is stainless steel 1.4571.
Nut in stainless steel 1.4571 with thread G 1/2".
Nut in stainless steel 1.4571 with thread M20 × 1.5.
Digital pressure gauge with 74 mm diameter, range -1 to 0 bar and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial...
Digital manometer with 74 mm diameter and 0 to 1 bar range with 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial...
Digital manometer with 74 mm diameter, 0 to 10 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial applications...
Digital manometer with 74 mm diameter, 0 to 100 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial applications...
Digital manometer with 74 mm diameter and 0 to 1000 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial...
Digital manometer with 74 mm diameter, 0 to 16 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial applications...
Digital manometer with 74 mm diameter, 0 to 160 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial applications...
Digital manometer with a diameter of 74 mm and a range of 0 to 1,600 bar with 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding...
Digital manometer with 74 mm diameter and 0 to 2.5 bar range and 1/4" pipe thread connection. Digital display for accurate pressure measurement in demanding industrial...
