M7 air-powered pneumatic tools, Page 2
-
Impact wrenches; pneumatic design
-
Ratchet wrenches; pneumatic design
-
Nuts for tighteners; cast iron
-
Shank grinders; pneumatic design
-
Angle grinders; pneumatic design
-
eccentric grinders; pneumatic design
-
Sheet metal cutters; pneumatic design
-
Car body saws; pneumatic design
-
Drills; pneumatic design
-
Screwdrivers; pneumatic design
-
Chopping hammers; pneumatic design
-
Riveting pliers; pneumatic design
-
Staplers and nailers; pneumatic design
-
Pressure lubricators; pneumatic design
-
Balancers; professional design M7
-
Other tools; pneumatic design
Bestsellers
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 17 mm screws.
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 250 mm for nuts with 3/4" square clamping. The outer square is equipped with a...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 22 mm screws.
Small eccentric grinder with 125 mm diameter disc, 9000 idle speed, 6.3 bar working pressure and 142 l/min air consumption.
Impact wrench with 3/4" chucking square for tightening and loosening screws up to M25. Equipped with double hammer impact driver with max. torque of 1 627 Nm. Extremely short...
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 200 mm for nuts with 3/4" square clamping. The outer square is equipped with a...
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 150 mm for nuts with 3/4" square clamping. The outer square is equipped with a...
Hardened square reducer with 35 mm diameter and 48 mm height equipped with ball. Inner square 1/2" with reduction to outer square 3/4".
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 27 mm screws.
Impact wrench with 1/2" clamping square for tightening and loosening smaller screws with low force requirements. Equipped with double hammer impact driver with max. torque 542...
Vibratory sander for sanding wooden and metal surfaces, without suction. For rectangular sandpaper, paper fixing by wire mechanism. Low centre of gravity for uniform grinding;...
Pressure lubricator with lubricant dosing with 500 cc container, max. pressure 8,3 bar and 1/4" thread. Precise lubricant dosage of 0.5 g per batch and high lubrication output...
Miniature oiler for direct mounting on 1/4" air tool inlet threads . Placement directly on the tool improves oil dispersion in the compressed air. Possibility of adjusting the...
Pneumatic chisel hammer in practical case with 4 chisels, clamping spring, oil container and connection nipple.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 27 mm screws.
Practical pneumatic professional stapler and nailer combined into one device for staples with a width of 5.7 mm and a height of 16 to 40 mm and nails with a length of 15 to 50...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 40 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 32 mm screws.
Set of grinding wheels with 6 mm shank. Designed for miniature and foot grinders powered by compressed air from the renowned manufacturer of pneumatic tools M7.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Set of 5 chisels with different profiles with hexagonal shank. Flat chisel, cutting chisel, scraping chisel, separating chisel, pin removal chisel. Chisel length 175 mm.
Hardened nuts for high tightening torques. For impact wrenches with 1" clamping square for 33 mm screws.
Set of 5 hexagon chisels 10 mm for pneumatic chisel hammer AH-9150K.
Replacement needle set for needle sharpener SN-1268. Made of special flexible steel with long life to M7 brand air tools.
Replacement pad 125 mm diameter with Velcro for EG-125 grinder.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Replacement needle set for SN-1288. Made of special flexible steel with long life to M7 brand air tools.
Set of 5 grinding wheels with 6 mm shank. Designed for pneumatic tools and miniature and shank grinders powered by compressed air.
Air saw with 10,000 oscillations per minute, working pressure 6.3 bar and air consumption 143 l/min.
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 30 mm screws.
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P54 in the picture.
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 250 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Riveting pliers in a handy case with rivet samples, mounting keys, spare o-rings and springs and a compressed air-powered connection nipple.
Polishing sponges with a diameter of 76 mm designed for the M7 QP-123 air driven polisher. The sponge is medium coarse.
Quick-release chisel head for the AH-9150K pneumatic chisel hammer.
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 125 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Small straight grinder with 6 mm shank with 25,000 idle speed, working pressure 6.3 bar and air consumption 100 l/min.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 20 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 29 mm screws.
Polishing sponges with a diameter of 76 mm designed for the M7 QP-123 air driven polisher. The design of the sponge is rough.
