Compressed air hose, Page 10
-
Plastic hoses PUJ - PA - PTF - PE
-
Pressure hoses with braid air - oil - gases
-
Suction and transport hoses reinforced hoses
-
Spiral hoses for all tools
-
Eschbach fire hoses flat hoses for firefighters
-
Connecting hoses for pressure assemblies
-
Hose clamps various types and designs
-
Winding drums open and closed construction
-
V-belts smooth, serrated, multiple
-
Hose accessories pliers, holders, reels...
best-selling products

The blue plastic spiral hose 8/5 mm made of polyurethane in 5 m length is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral...


EGW deformation hose coupling with a range of 18.8-21.1 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Hard nylon tubing in black 4/2.5 mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...


Hose for heavy-duty applications with good resistance to impact, microorganisms and salty solutions in blue with dimensions 10/8 mm. The use of plastic PE tubing especially in...

PW4 35mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

The blue plastic spiral hose 12/8 mm made of polyurethane in a length of 7.5 m, including fitted hose ends, is characterised by high resistance to breakage, abrasion and...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 32-50 mm. Manufactured according to DIN 3016. With house and tightening...

Vacuum hose with inner diameter 51 mm and working temperature -5/+60°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

Suction hose PUR1 with a diameter of 160 mm made of abrasion-resistant polyurethane foil with a steel wire spiral. Designed for suction and ventilation of air, non-aggressive...

The blue plastic spiral hose 10/6.5 mm polyurethane, 10 m long, including fitted end caps, is characterized by high resistance to breakage, abrasion and pressure. The small...

Screw hose clamps with a band width of 12 mm and a range of 50-65 mm in material version W1 - galvanized steel. Extremely strong one-piece moulded house, rounded edges to reduce...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...

Heavy-duty hose with good resistance to impact, microorganisms and salty solutions in black with 6/4 mm dimensions. The use of plastic PE tubing especially in industry,...

Suction hose PUR1 with a diameter of 305 mm made of abrasion-resistant polyurethane foil with steel wire spiral. Designed for suction and ventilation of air, non-aggressive...

Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion in dimensions 69/50 mm. Outer shell made of SBR rubber - black, abrasion and weather...

Blue pressure hose 14/9 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...

PW4 39mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Green hose with 8/6 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 12-20 mm. Manufactured according to DIN 3016. With house and tightening...

Plastic hose 7/4 mm made of softened PVC, single-layer without braid, non-pressure, transparent. Operating temperature: -15/+60 °C. Designed for low demanding water and air...

Vacuum hose with inner diameter 80 mm and working temperature -5/+60°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

Pressure hose with hose diameter 26/19 mm in black with red stripe. Designed primarily for the transport of hot media - water, air and chemicals, especially in the plastics...

Black plastic pliers for cutting hoses and air lines up to 20 mm. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system. They fit very...

Blue hose with dimensions 14/12 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Vacuum hose with inner diameter 40 mm and working temperature -5/+65°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

PUJ polyurethane tubing in neutral transparent 12/8 mm design, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone,...


Replacement blade for small KTM pliers up to hose size 20 mm. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system.

FBW deformation clamp with a range of 7.3 mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...

PW4 31mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp PW1 174 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

Clear tubing with 12/8 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 40-60 mm. Manufactured according to...

Hose clamp PW1 55 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Hose clamp PW1 252 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 80 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
