Compressed air hose, Page 11
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses in the range of 25-40 mm. Manufactured according to DIN 3016. With house and...

Clear plastic hose with 6/4 mm diameter and high flexibility requirements. Operating temperature -40/+80 °C. Suitable for high pressure, chemical resistance and high flexibility...

Hard nylon tubing in black 4/2.5 mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...

Multi-purpose black hose with blue stripe, diameter 21/13 mm. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...

Plastic polyurethane hose 10/6,5 mm made of Elastollan 1198. White in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 170-190 mm. Manufactured according to DIN 3016. With house and...

Polyurethane PUJ tubing in red 10/6.5 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

FoxiBase PUR SL-SE suction hose with a diameter of 102 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 110-130 mm. Manufactured according to DIN 3016. With house and tightening...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in 1000 mm length and straight end...

Special pliers for cutting air ducts up to 30 mm. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system.

Extremely abrasion-resistant firefighting hose in red, certified to DIN 14811, diameter 25 mm. Made of 100% synthetic polyester yarn with black EPDM inner liner, outer surface...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 140-160 mm. Manufactured according to DIN 3016. With house and tightening...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and...

PUJ polyurethane tubing in green 8/5.5 mm suitable especially for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

The blue plastic spiral hose 6/4 mm polyurethane, 7.5 m long, including fitted hose ends, is highly resistant to breakage, abrasion and pressure. The small diameter of the...

Polyurethane PUJ tubing in red 8/5.5 mm suitable especially for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1000 mm with straight and...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 20-32 mm. Manufactured according to...

Clear hose with dimensions 10/6 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Hard nylon tubing in black 6/4 mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...

LPH press ring with a diameter of 16 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

PW1 31 mm strength hose clamp with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry...

Hose made of PU Elastollan C-98 black, 4/2,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

DW hose clamps with perforated band in material finish W2 with band width 12,7 mm and range 50-70 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel strip and...

FBW deformation clamp with a range of 11.3mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 16-25 mm. Manufactured according to DIN 3016. With house and tightening...

High-quality blue spiral hose 12/8 mm with extreme spiral return capability of 2.5 m and long service life, including end quick couplers. Made of branded granular elastollan...

PA12 clear hose 6/4 mm, manufactured according to DIN 73378 / 74324. Polyamide LongLife excellent dimensional stability at higher temperatures. Operating temperature -40/+100...

FoxiPro PUR L suction hose with a diameter of 140 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...