Compressed air hose, Page 20
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and...

High-quality black 6/4 mm spiral hose with extreme spiral return capability of 4 m and long service life, including end quick couplings. Made of branded granular elastollan...

SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Swivel fitting with female pipe thread G3/8" for hose size 9 x 13 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

FoxiPro PUR L suction hose with a diameter of 38 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

SW4 100mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Hose clamp for attaching right-hand spiral suction hose with foil construction in the range of 50-70 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect sealing thanks to the...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 120-140 mm. Manufactured according to DIN 3016. With house and tightening...

The inner length is 878 mm and the calculated length is 900 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...

Plastic pipe PA12 for compressed air piping. Pipe size 28 / 24 mm with recommended operating pressure 10 bar. Classic blue colour as marking for air ducts. Easy connection with...

FoxiPro PUR XL 40 mm diameter suction hose made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with a steel wire spiral. Smooth inside for exceptional abrasion...

Silicone tubing 22/16 mm temperature resistant and food-safe in transparent design. Operating temperature -60/+200 °C complies with FDA and 1935/2004 EC directives. Designed for...

Fixed quick coupling with protective spring for hose 9 x 13 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...

The inner length is 1 168 mm and the calculated length is 1 190 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Serrated V-belt with a calculated length of 1 030 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.

Hose clamp SW4 110mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...

FoxiPro PUR XL suction hose with a diameter of 51 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...

ES male quick coupling male DN7,2 with coupling nut and protective spring for 9 x 12 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling. New...

The inner length is 913 mm and the calculated length is 935 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...

Hose clamp for attaching the right-hand spiral suction hose in the range of 24-48 mm with 9 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over...

Hose clamp for attaching the right-hand spiral suction hose in the range of 32-52 mm with 9 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over...

FoxiPro PUR L suction hose with a diameter of 115 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Polyurethane PUJ tubing in yellow 10/6.5 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging....

FoxiPro PUR L suction hose with a diameter of 127 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

The inner length is 1 158 mm and the calculated length is 1 180 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 193 mm and the calculated length is 1 215 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 223 mm and the calculated length is 1 245 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 228 mm and the calculated length is 1 250 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 245 mm and the calculated length is 1 267 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 298 mm and the calculated length is 1 320 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 318 mm and the calculated length is 1 340 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 348 mm and the calculated length is 1 370 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Hose clamp stand CH-01 made of steel wire. Can be placed on a desk or hung on the wall. Allows you to keep an overview of the hose clamps.

Serrated V-belt with a calculated length of 1 180 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel...