Compressed air hose, Page 22
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 70-90 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

PW4 85mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 91mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 97mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 100-120 mm. Manufactured according to...

SW4 260mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

ES male male quick coupling DN7,2 with coupling nut and protective spring for 4 x 6 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling. New...

Hose made of PU Elastollan C-98 cyan, size 12/9 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

The inner length is 1 860 mm and the calculated length is 1 890 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 10 x 6,5 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-50 mm. Manufactured according to DIN 3016. With house and...

The inner length is 1 610 mm and the calculated length is 1 640 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 630 mm and the calculated length is 1 660 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 670 mm and the calculated length is 1 700 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 680 mm and the calculated length is 1 710 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 710 mm and the calculated length is 1 740 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 730 mm and the calculated length is 1 760 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 760 mm and the calculated length is 1 790 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 810 mm and the calculated length is 1 840 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

High quality blue spiral hose 12/8 mm with extreme spiral return capability of 5 m and long life. Made of branded granulate elastollan 1190 without end quick connectors....

Fixed fitting with R3/8" male tapered thread for 9 x 13 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

The inner length is 1 450 mm and the calculated length is 1 480 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 550 mm and the calculated length is 1 580 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 580 mm and the calculated length is 1 610 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 448 mm and the calculated length is 1 470 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Serrated V-belt with a calculated length of 825 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.

The inner length is 940 mm and the calculated length is 970 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...

The inner length is 1 870 mm and the calculated length is 1 900 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 890 mm and the calculated length is 1 920 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 910 mm and the calculated length is 1 940 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 930 mm and the calculated length is 1 960 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 960 mm and the calculated length is 1 990 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 970 mm and the calculated length is 2 000 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

FoxiPro PUR L suction hose with a diameter of 38 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...

Hose clamp PW1 252 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel...

Hose made of PU Elastollan C-98 yellow, 6/4 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...