Compressed air hose, Page 37
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Silicone tubing 17/9 mm temperature-resistant and food-safe in transparent design. Operating temperature -60/+200 °C complies with FDA and 1935/2004 EC directives. Designed for...

High-quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 2.5 m and long service life. Made of branded granulate elastollan 1190 without end quick...

Inner tube of black EPDM, smooth; outer jacket of black EPDM, well resistant to weathering and ageing. Hose diameter 42/32 mm. Reinforcement high-strength textile braid; working...

FoxiPro PUR L suction hose with a diameter of 225 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Deformation hose clamp EWS4 range 3,3 to 4,1 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Hose clamp designed for hose diameters 60-425 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Milk plastic hose 4/2 mm made of Kynar HD4000 brand granulate. Excellent resistance to chemicals, including the most aggressive ones. Exceptional UV resistance and temperature...

Plastic polyurethane hose 10/6,5 mm made of Elastollan 1198. Red in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....

Fixed fitting with R1/4" male tapered thread for 8 x 12 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

The inner length is 1 150 mm and the calculated length is 1 180 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Hose clamp SW1 - 75 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

High-quality pressure-suction hose for water and liquids, with an inner diameter of 152 mm and an operating temperature of -25/+60°C, for low-temperature work. Reinforced with...

FoxiBase PUR SL-SE 0.4 suction hose with a diameter of 51 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

Fixed fitting with male tapered thread R1/4" for 6 x 8 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

Fluoropolymer plastic hose with excellent resistance to most chemicals. 12/10 mm diameter extremely transparent design. Operating temperature -60/200 °C dielectric properties,...

Standard fire hose in white, certified according to DIN 14811 class 1. Supplied in performance class L2. Made of 100% synthetic polyester yarn with a black EPDM inner liner in a...

Standard fire hose in white, certified according to DIN 14811 class 1. Supplied in performance class L2. Made of 100% synthetic polyester yarn with a black EPDM inner liner in a...

FoxiPro PUR L suction hose with a diameter of 90 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

High-quality pressure-suction hose for water and liquids, with an inner diameter of 120 mm and an operating temperature of -25/+60°C, for low-temperature work. Reinforced with...

Standard fire hose in white, certified according to DIN 14811 class 1. Supplied in performance class L2. Made of 100% synthetic polyester yarn with a black EPDM inner liner in a...

The inner length is 1 170 mm and the calculated length is 1 200 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm with straight and...

Quick coupling nipple swivel with protective spring for hose 6.5 x 10 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is...

PWD 59 - 67 mm strength hose clamps with two tightening screws located on the hose clamp. High tightening torque for hoses with large diameters. Made of : Stainless steel strip...