Compressed air filtration pressure 16 to 64 bar, Page 5
-
Professional air filtration AAF; threaded version up to 16 bar
-
Professional air filtration BF; flanged version up to 16 bar
-
HF professional filtration; threaded version up to 50 bar
Bestsellers

Electronic pressure gauge designed to check and monitor the condition of the filter cartridge. The condition of the filter cartridge is determined by the pressure gradient, the...

AAFA activated carbon filter in 3/8" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....

AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...

Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-198 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-780. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...

Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.

Electronic timed condensate drain for compressed air systems up to 16 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...

Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...

Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-35 and AAFM-60 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...

AAFM pre-filter in 2" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...

Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-120. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...

AAFA 2" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...

AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

Replacement microfiltration cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-335 microfilters. Recommended replacement 12 months or every 4,000 MH and when...

Replacement cyclone cartridge for liquid water filtration AAFC-1500V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...

Electronic timed condensate drain for compressed air systems up to 50 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...

Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min....

Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...

Catalytic filters (hopcalite) AAFH2 in 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Catalytic filters (hopcalite) AAFH2 in 3/4" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-120. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

AAFB 2" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...

Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection with 2" internal pipe threads. Designed for flow rates up to 8233 l/min. Special...

Catalytic filters (hopcalite) AAFH2 in 1 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Catalytic filters (hopcalite) AAFH2 in 1 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Catalytic filters (hopcalite) AAFH2 in 1" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Catalytic filters (hopcalite) AAFH2 in 1" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-335. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-510. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-780. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...

AAFM 1 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...

AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...

AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....