Compressed air filtration pressure 16 to 64 bar, Page 5
-
Professional air filtration AAF; threaded version up to 16 bar
-
Professional air filtration BF; flanged version up to 16 bar
-
HF professional filtration; threaded version up to 50 bar
Bestsellers
Electronic pressure gauge designed to check and monitor the condition of the filter cartridge. The condition of the filter cartridge is determined by the pressure gradient, the...
The BFP basic filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...
The BFA microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre and activated carbon liner with filtration capacity...
AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Float valve for condensate discharge from compressed air system working on float principle. Version AOK16B for internal mounting of filter vessels using 1/2" thread.
The AFS microfilter is used to remove the largest mechanical impurities from compressed air up to 0.01 um according to ISO 8573-1 class 1. Body with easily removable container...
Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-120 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-35 and AAFM-60 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-78 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement cyclone cartridge for liquid water filtration AAFC-1500V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
Replacement microfiltration cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-510 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging...
AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-198. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-78 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-198 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
AAFB 2" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
AAFM pre-filter in 2" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-510 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-510. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-780. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
AAFB 2" coarse filter for removal of the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-335. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
AAFA 2" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...
AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....
Adsorption filter with activated carbon AAFA2 in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Adsorption filter with activated carbon AAFA2 in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Float-operated condensate drain valve for compressed air systems up to 20 bar. Version AOK20B for external mounting on the filter body with 1/2" thread.
AAFP basic filter in 3" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection with internal pipe threads 1 1/2". Designed to allow flow rates up to 6667 l/min....
