Compressed air hose, Page 14
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Hose clamp designed for hose diameters 60-170 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 120-140 mm. Manufactured according to...

Hose clamp designed for hose diameters 60-380 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Deformation hose clamp EWS4 range 15,3 to 17,5 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Multi-purpose black hose with blue stripe, 44/32 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 30-45 mm. Manufactured according to...

Tube made of grilamid PA12 for plastic design of compressed air pipelines. Pipe dimensions 18/14 mm with recommended operating pressure 17 bar. The classic blue colour for the...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 50-70 mm. Manufactured according to...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 140-160 mm. Manufactured according to DIN 3016. With house and...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 8 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

FoxiPro PUR L suction hose with a diameter of 26 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 80-100 mm. Manufactured according to DIN 3016. With house and tightening...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 2000 mm and straight...

Flat hoses made of 100% synthetic high-strength polyester yarn with compact vulcanized rubberized special polymers, 19 mm in size with a working pressure of 20 bar. Special flat...

Deformation hose coupling EWD1 with a range of 15 to 18 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Multi-purpose black hose with blue stripe in 35/25 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 70-90 mm. Manufactured according to...

EGW deformation hose coupling with a range of 13.9-16.1 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

SW4 35mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range 60-80 mm. Manufactured according to DIN...

EGW deformation hose coupling with a range of 17.1-19.3 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

FoxiPro PUR L suction hose with a diameter of 55 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm and straight ends.

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 120-140 mm. Manufactured according to DIN 3016. With house and...

Polyamide PA12 10/8 mm tubing in black anti-static version with ATEX II 2 G/D certification. Operating temperature -30/+80 °C. Tubing for applications with demanding safety...

Polyurethane PUJ tubing in yellow 12/8 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

Deformation hose clamp EWS4 range 13,0 to 15,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with band width 9 mm for hoses with a range of 90-110 mm. Manufactured according to...

FBW deformation clamp with a range of 15.8mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...