Compressed air hose, Page 14
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Blue hose with 12/8 mm dimensions and excellent pressure resistance designed for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils,...

Blue plastic hose with 10/8 mm diameter and high flexibility requirements. Operating temperature -40/+80 °C. Suitable for high pressure, chemical resistance and high flexibility...

Swivel fitting with female pipe thread G1/4" for hose size 6.5 x 10 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure...

Hose made of PU Elastollan C-98 clear, 12/9 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

Blue transparent PVC hose with dimensions 19/13 mm reinforced with high strength PES fibre is designed for transport of filtered compressed air free of oils and condensate....

Extremely abrasion-resistant firefighting hose in red, certified to DIN 14811, diameter 25 mm. Made of 100% synthetic polyester yarn with black EPDM inner liner, outer surface...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-40 mm. Manufactured according to DIN 3016. With house and...

Deformation hose coupling EWD1 with a range of 7 to 9 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in 1000 mm length and straight end...

The blue plastic spiral hose 6/4 mm polyurethane, 5 m long, including fitted hose ends, is characterized by high resistance to breakage, abrasion and pressure. The small...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 180-200 mm. Manufactured according to DIN 3016. With house and...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-50 mm. Manufactured according to DIN 3016. With house and...

PUJ polyurethane tubing in red 12/8 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and...

Multi-purpose black hose with blue stripe in 35/25 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...

FoxiPro PUR L suction hose with a diameter of 40 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 100-120 mm. Manufactured according to DIN 3016. With house and...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 120-140 mm. Manufactured according to DIN 3016. With house and tightening...

Hose clamp designed for hose diameters 60-170 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...

Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range of 16-27 mm. According to SAE standard with house and tightening screw and...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 40-60 mm. Manufactured according to...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 50-70 mm. Manufactured according to...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range 60-80 mm. Manufactured according to DIN...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 70-90 mm. Manufactured according to...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...

Fixed quick coupling nipple with protective spring for 4 x 6 mm hose in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...

Deformation hose coupling EWD1 with a range of 37 to 40 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....