Compressed air hose, Page 15
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Deformation hose clamp EWS4 range 10,1 to 11,8 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 8 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

PW4 19mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Polyurethane PUJ tubing in yellow 10/6.5 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging....

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-40 mm. Manufactured according to DIN 3016. With house and...

Special pliers for cutting air ducts up to 30 mm. With the pliers, you simply cut the pipe so that it can be easily plugged into the socket system.

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 110-130 mm. Manufactured according to...

ES male male quick coupling DN7,2 with coupling nut and protective spring for 5 x 8 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling. New...

Strength hose clamp SW1 - 60mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber...

PW4 43mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

ES male quick coupling male DN7,2 with coupling nut and protective spring for 9 x 12 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling. New...

Hose clamp PW1 51 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Plastic roll 25 m - PA12 for compressed air piping. Pipe size 28 / 24 mm with recommended operating pressure 10 bar. Classic blue colour as marking for air ducts. Easy...

High-quality pressure-suction hose for water and liquids, with an inner diameter of 51 mm and an operating temperature of -25/+60°C, for low-temperature work. Reinforced with...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses in the range of 200-220 mm. Manufactured according to DIN 3016. With house and...

PW4 31mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Quick coupling nipple swivel with protective spring for 5 x 8 mm hose in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized...

PW4 39mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Yellow hose with 8/6 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 100-120 mm. Manufactured according to DIN 3016. With house and...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 110-130 mm. Manufactured according to DIN 3016. With house and tightening...

Clear tubing with 8/4 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Black hose with 8/4 mm dimensions and excellent pressure resistance designed for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils,...

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 80 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

Hose made of PU Elastollan C-98 black, size 10/7 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 20-32 mm. Manufactured according to DIN 3016. With house and tightening...

Silicone tubing 22/16 mm temperature resistant and food-safe in transparent design. Operating temperature -60/+200 °C complies with FDA and 1935/2004 EC directives. Designed for...

Hose clamp PW1 67 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

Blue-black plastic hose, 12/9 mm. Made of branded Elastollan C98 granulate. Suitable for multiple connections to pneumatic cylinders and valves. Operating temperature -40/+60 °C...