Compressed air hose, Page 16
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Deformation hose coupling EWD1 with a range of 5 to 7 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

FoxiPro PUR L suction hose with a diameter of 120 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2500 mm and straight end...

Clear hose with dimensions 22/18 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

PW4 35mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Clear tubing with 14/10 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils,...

Blue pressure hose 18,5/13 mm in condensate-resistant PVC with one textile braid. The hose is equipped with quick couplings ES DN7,2 - male and female. Designed for transport of...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...

The blue plastic spiral hose 10/6.5 mm polyurethane, 10 m long, is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...

Deformation hose clamp EWS4 range 15,3 to 17,5 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 65 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

Hose made of PU Elastollan C-98 cyan, size 10/7 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...

FoxiPro PUR L suction hose with a diameter of 45 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Fixed fitting with G1/4" female pipe thread for 5 x 8 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.

Blue hose with dimensions 14/10 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

High-quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 7.5 m and long service life, including end quick couplings. Made of branded granular elastollan...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hose range 10-16 mm. Manufactured according to DIN 3016. With house and tightening screw and...

High quality black 6/4 mm spiral hose with extreme spiral return capability of 4 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed for...

The blue plastic spiral hose 12/8 mm polyurethane in 10 m length is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...

PMW 10mm hose clamps for hoses with small diameters. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.

The blue plastic spiral hose 10/6.5 mm polyurethane, 15 m long, is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...

High-quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 2.5 m and long service life. Made of branded granulate elastollan 1190 without end quick...

Hose clamp PW1 103 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

SW4 50mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

FoxiPro PUR L suction hose with a diameter of 45 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...

DW hose clamps with perforated band in material finish W1 with band width 8,5mm and range 10-16 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of galvanized...

Suction hose PUR1 with a diameter of 152 mm made of abrasion-resistant polyurethane foil with steel wire spiral. Designed for suction and ventilation of air, non-aggressive...

Suction hose PUR1 with a diameter of 40 mm made of abrasion-resistant polyurethane foil with a steel wire spiral. Designed for suction and ventilation of air, non-aggressive...

High-quality blue spiral hose 10/6.5 mm with extreme spiral return capability of 5 m and long service life, including end quick couplers. Made of branded Elastollan 1190...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 140-160 mm. Manufactured according to DIN 3016. With house and...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 170-190 mm. Manufactured according to DIN 3016. With house and...

High-quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 5 m and long service life, including end quick couplers. Made of branded granular elastollan...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 230-250 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 240-260 mm. Manufactured according to DIN 3016. With house and...