Compressed air hose, Page 17
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

FoxiPro PUR L suction hose with a diameter of 40 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

FoxiPro PUR L suction hose with a diameter of 18 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...

Hose clamp PW1 226 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 70-90 mm. Manufactured according to...

Green polyurethane PUJ tubing 10/6.5 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 70-90 mm. Manufactured according to...

Hose clamp PW1 148 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Deformation hose coupling EWD1 with a range of 22 to 25 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Swivel fitting with male tapered thread R3/8" for 8 x 12 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 12 x 9 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New...

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 10 x 8 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New...

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 6 x 4 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 110-130 mm. Manufactured according to DIN 3016. With house and...

LPH press ring with a diameter of 22 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Fixed quick coupling nipple with protective spring for hose 6.5 x 10 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is...

PW4 148mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 180-200 mm. Manufactured according to DIN 3016. With house and...

Swivel fitting with female pipe thread G1/4" for hose size 6.5 x 10 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure...

Hose clamp PW1 139 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2000 mm and straight ends.

PW4 139mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Quick coupling nipple swivel with protective spring for 4 x 6 mm hose in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 10 x 6,5 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

PW4 112mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 121mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

FoxiPro PUR XL suction hose with a diameter of 80 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...

PW4 187mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 226mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

FoxiPro PUR L suction hose with a diameter of 32 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...

LPH press ring with a diameter of 33 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 140-160 mm. Manufactured according to...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 1500 mm with straight...

Swivel fitting with male tapered thread R1/4" for 5 x 8 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

FoxiPro PUR L suction hose with a diameter of 16 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...