Filtration, regulation and treatment of compressed air, Page 13
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external thread G 1/2"....

The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 12 m³/hr from the compressor at a 3°C dew point enables use in...

Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 3.

Microfilter in metal version up to 18 bar with 0,01 µm liner, flow rate 1 750 l/min in size 1 with 1/4" thread atdesigned for very gentle removal of solid dirt, water and oil...

Replacement filter element CHPC-007V for cyclone separator CHP. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure up to...

Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....

Replacement filter cartridge 5 um for basic filter of FUTURA series - F14-F and F38-F. The filter insert can be easily replaced.

High pressure regulator 3/8" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 3.0 - 50...

Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-2160 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 3 Bar. Maximum inlet...

Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 40 bar, various outlet pressures, operating temperature...

Regulator with inlet up to 25 bar 1" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate of...

AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...

Measuring chamber for dew point sensor - for regeneration air saving - BDRY-MK. B-DRY dryers can operate in two operating modes depending on the settings of the control unit....

Regulator with inlet up to 25 bar 3/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...

Dew point sensor including cable - for air saving regeneration - BDRY-OS. B-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...

precision compressed air pressure regulator with 0.05 - 3 bar control. Inlet pressure up to 16 bar with a maximum flow rate of 5,600 l/min. Connection via 1/2". High-performance...

Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...

AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...

Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...

AAFS 1 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...

AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...

Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...

Cyclone separator CHP1 with 1 1/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 100 bar,...

Standard connection set for FUTURA size 4 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...

Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...

40 micron filter insert for compressed air treatment units in Combibloc design from EWO.

Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases with extreme flow rates. Maximum inlet pressure 40 bar, various outlet pressures,...

Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases with extreme flow rates. Maximum inlet pressure 40 bar, various outlet pressures,...

Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases with extreme flow rates. Maximum inlet pressure 40 bar, various outlet pressures,...

Cyclone separator CHP1 with threaded connection 1 1/2". It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 100 bar,...

High-flow silencer with external pipe thread G 2" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....

Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases with extreme flow rates. Maximum inlet pressure 40 bar, various outlet pressures,...

Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases with extreme flow rates. Maximum inlet pressure 40 bar, various outlet pressures,...

Treatment units FUTURA, Shut-off, switching, filling, check valves, Designed for compressed air and for neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C,...

Connection cable 5 m - with straight connector designed for proportional DRPE controllers. Operating temperature -10 to +60 °C. Electrical protection IP65. Connection - 4-pole...

Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...

Cyclone separator CHP2 with 1 1/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar,...

Cyclone separator CHP2 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar, working...