Filtration, regulation and treatment of compressed air, Page 18
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
The WDF-210 condensing air dryer provides highly efficient compressed air drying with a flow rate of 210 m³/h (3,500 l/min) and a pressure dew point of +3 °C. Integrated filters...
Regulators for pressure reduction of compressed air and other non-volatile and non-toxic gases with extreme flow rates. Maximum inlet pressure 40 bar, various outlet pressures,...
Replacement stainless steel filter element IHPC-047V for cyclone separator IHP. It enables inexpensive and efficient removal of water and impurities from compressed air. Working...
The WDF-190 condensing air dryer ensures efficient moisture removal from compressed air with a flow rate of 190 m³/h (3,166 l/min) and a pressure dew point of +3 °C. Thanks to...
AAFB 3" coarse filter to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable container and...
Regulator with inlet up to 25 bar 1" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate of...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via G 3/4" male thread. The...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F12 with 2" internal thread connection. The filter is equipped with a clogging indicator and an...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F17 with 3" female thread connection. The filter is equipped with a clogging indicator and an...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F16 with 3" internal thread connection. The filter is equipped with a clogging indicator and an...
Hankison 's NGF series SF type basic ISO compressed air filtration. Filter size F11 with 1 1/2" female threads. The filter is equipped with a clogging indicator and an automatic...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F15 with 2 1/2" female threads. The filter is equipped with a clogging indicator and an automatic...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F14 with 2 1/2" female threads. The filter is equipped with a clogging indicator and an automatic...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F13 with 2 1/2" female threads. The filter is equipped with a clogging indicator and an automatic...
Hankison 's NGF series SF type basic ISO compressed air filtration. Filter size F10 with 1 1/2" female threads. The filter is equipped with a clogging indicator and an automatic...
Modular filtration system PPA-307C for clean air supply without air dryer in the ducts. Concept combining cyclone separator, pre-filter, microfilter, pressure regulator and 2...
Proportional pressure regulator with flow rate 530 l/min, 0 - 4 bar control, controlled by 4-20 mA electrical signal. Integrated transducer to convert the electrical quantity to...
Hankison adsorption filter cartridge for CF series air microfilter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum...
Replacement stainless steel filter element IHPC-003V for cyclone separator IHP. It enables inexpensive and efficient removal of water and impurities from compressed air. Working...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Proportional pressure regulator with a flow rate of 530 l/min, 0 - 6 bar control, controlled by a 4-20 mA electrical signal. Integrated transducer to convert the electrical...
Regulator with inlet up to 40 bar for pressure reduction of compressed air and other and non-aggressive gases with inlet G 1/4". Outlet pressure control range 0,5 - 3 Bar....
Differential pressure gauge to indicate filter cartridge clogging in FUTURA compressed air treatment units. Keep track of the need to change the filter cartridge and keep the...
Replacement plastic container with manual release for compressed air treatment units in Combibloc design from EWO.
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with G 1 1/4" inlet and 0,5 - 3 Bar outlet pressure regulation. Maximum inlet...
Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F10 with 1 1/2" female threads. The filter is equipped with a clogging indicator...
Regulator for pressure reduction of compressed air and other non-fluid and non-toxic gases with inlet G 1/2" and outlet pressure regulation 0,5 - 3 Bar. Maximum inlet pressure...
Series of AISI316 stainless steel treatment units designed primarily for industrial applications in sectors such as food, chemical and petrochemical industries and laboratory...
AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...
AAFMS2 1 1/2" molecular sieve capsule filter designed to prevent moisture leakage into the air during shutdown of adsorption dryers according to ISO 8573-1 class 1. Body with...
Absorption filter with 0.005 um activated carbon, 1" connection, for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....
HFPA activated carbon filter with G1 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to...
HFPA activated carbon filter with G1 1/4" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...
CHP1A activated carbon filter with G1 1/2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
