Filtration, regulation and treatment of compressed air, Page 38
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN150 clearance. Designed for flow...

Differential pressure gauge to indicate filter cartridge clogging in FUTURA compressed air treatment units. Keep track of the need to change the filter cartridge and keep the...

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with internal pipe threads 1 1/2". The design allows a flow rate of up to 6667 l/min....

Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with internal pipe threads 1 1/2". The design allows a flow rate of up to 4700 l/min....

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA treatment units - check valves, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...

The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...

40 micron filter insert for compressed air treatment units in Combibloc design from EWO.

Filter insert 5 for compressed air treatment units in Combibloc design from EWO.

Measuring chamber for dew point sensor - for regeneration air saving - BDRY-MK. B-DRY dryers can operate in two operating modes depending on the settings of the control unit....

MADRY-123 membrane dryer with compressed air flow up to 123 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to...

MADRY-180 membrane dryer with compressed air flow up to 180 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to...

MADRY-63 membrane dryer with compressed air flow up to 63 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

MADRY-90 membrane dryer with compressed air flow up to 90 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...

Controller diaphragm for compressed air treatment units in Combibloc design from EWO.

The CHP1S microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP1S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP1S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP1S microfilter with G2" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP1S microfilter with G3/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

CHP1S microfilter with G3/8 connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum working...

The CHP2S microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

CHP2S microfilter with G1 1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP2S microfilter with G1" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP2S microfilter with G1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP2S microfilter with G3/4" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP2S microfilter with G3/4" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP4S microfilter with G1 1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP4S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....

The CHP4S microfilter with G1" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP4S microfilter with G1/2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP4S microfilter with G1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP4S microfilter with G2" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um. Maximum...

The CHP4S microfilter with G3/4" connection thread is designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.01 um....