Filtration, regulation and treatment of compressed air, Page 7
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
List of products
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFA activated carbon filter in 3/8" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Hankison filter cartridge for SF series air filter type F07. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 1/2" with outlet pressure regulation 0,5 - 16 Bar. Maximum inlet...
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 235 m³/hr (3 916 l/min) and connection via a G 1" male thread....
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-105 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-12 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-150 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-24 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-6 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-60 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Hankison filter cartridge for HF series air filter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
AAFA 1" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
Hankison filter cartridge for HF series air filter type F04. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Replacement cyclone cartridge for liquid water filtration AAFC-510V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Set for connecting 2 filters of the OMEGA AIR AAF series in sizes 198 - 780. Fast and elegant installation that everyone can handle.
Set for connecting 3 filters of the OMEGA AIR AAF series in sizes 35 - 120. Fast and elegant installation that everyone can handle.
Set for connecting 3 filters of the OMEGA AIR AAF series in sizes 25 - 30. Fast and elegant installation that everyone can handle.
Set for connecting 3 filters of the OMEGA AIR AAF series in sizes 198 - 780. Fast and elegant installation that everyone can handle.
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-1000. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-120. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 235 m³/hr (3,916 l/min) and a G1" male thread connection....
AAFS 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
Hankison filter cartridge for the PF series air filter type F04. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...
Hankison filter cartridge for UF series air microfilter type F10. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...
Compressed air condensation dryer for dew point +3°C. The maximum inlet pressure is 14 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G3/4" male...
Replacement filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-25 and AAFP-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Complete unit 2-piece pressure regulator assembly with filter and oiler in one unit. Designed for compressed air and neutral gases. Design according to ATEX II 2G2D. Maximum...
Hankison filter cartridge for SF series air filter type F10. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Compressed air treatment unit in metal design up to 18 bar. Lubricator in 1/4" size with a flow rate of up to 1100 l/min for compressed air lubrication of e.g. pneumatic tools....
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators in 1/4" size.
AAFM 1 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
AAFM pre-filter in 2 1/2" design to remove fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging indicator and an...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging indicator and an...