AC 30-6
List of products
Angle bracket for joining profiles with a 30x30 section at a 45° angle.
Aluminium profile with a modular cross-section dimension of 13x30 and 2 grooves in the shape of AC 30-6.
Floor bracket for mounting on profiles with a width of 30 mm.
Aluminium profile with a modular cross-section dimension of 30x60, with rounded corners and 6 grooves in the shape of AC 30-6.
Aluminium profile with a modular cross-section size of 30x60 and 6 grooves in the shape of AC 30-6.
Jig for precise drilling of holes in aluminium profiles with AC 30-6 groove.
Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Connecting latch for AC 30-6 series profiles, with M5x20 screw.
Aluminium end cap for 60x60 channel profile.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Aluminium profile with a modular cross-sectional dimension of 22.5x22.5 and 2 grooves of AC 30-6 shape.
Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.
Part to prevent rotation of perpendicular connection of profiles 084.112.002.
Handle made of black polyamide, dimensions 108x38 mm.
Small 90° angle bracket with dimensions 30x30 for joining profiles from the outside using M6 countersunk screws.
Rubber base pad insert with a diameter of 100 mm.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Cover strip for closing the 60x60 channel profile.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Connector for creating perpendicular joints of round profiles of the AC 30-6 series with a 30x30 cut in 2 axes.
Angled solid handle made of grey polyamide, measuring 128x43 mm.
Connector for creating perpendicular joints of round profiles series AC 30-6 with a 30x30 cut in 3 axes.
Universal angle bracket with a 90° angle and dimensions of 27x59 for connecting profiles from the outside using M6x16 screws.
Base with a diameter of 40 mm and an M6 connection thread. Base load capacity 450 kg.
Mounting bracket for gas spring to aluminium profile.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
Aluminium profile with a modular section dimension of 30x30, with rounded corners and 2 AC 30-6 shaped grooves.
Magnetic stop for detachable door installation.
Panel fixing block for thicknesses of 1 to 8 mm.
Aluminium profile with a modular section dimension of 30x30 and with 2 grooves in the shape of AC 30-6.
Drill bit for aluminium with a diameter of D=5.5 mm.
Three-part connector for creating perpendicular joints of round profiles series AC 30-6 with a 30x30 cut.
Plastic hinge made of polyamide with dimensions 50x50, for profiles 30/30.
Groove connector for connecting AC 30-6 series profiles at a 45° angle.
M18x0.75 threaded magnet for removable door installation.