AC 40-8, Page 4
Product sorting
List of products
Plastic cap for heavy-duty 80x80 profiles in black
Adjustable foot 40x100 mm with M8 thread
Aluminium drill bit with a diameter of D=7.5 mm.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.
Aluminium profile with a modular section dimension of 40x40 and with 2 adjacent AC 40-8 shaped grooves.
Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x40 section.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Universal angle bracket with a 90° angle and dimensions of 78x78 for connecting profiles from the outside using M8x20 screws.
Coupling for parallel connection of AC 40-8 series profiles and adjustment of their arbitrary mutual angle.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and M8 connection thread. Base load capacity of 1000 kg.
Square base for mounting on profiles with a 40x40 section.
Rubber base pad insert with a diameter of 100 mm.
Rubber base pad insert with a diameter of 80 mm.
Washer for fixing glass panels to block 084.509.001.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Connecting latch for AC 40-8 and AC 45-8 series profiles, with M6x25 screw.
Connecting latch for profiles of the AC 40-8 and AC 45-8 series, with M8x40 screw.
Corner connector for connecting 2 profiles of the AC 40-8 series with a 40x40 cut at a 90° angle.
Corner connector for connecting 3 profiles of the AC 40-8 series with a 40x40 cut at a 90° angle.
A sliding latch with a spring for closing doors, made of polyamide.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
Door stop with dimensions 56x30 equipped with a magnet.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Door stop for removable door installation, made of brass.
Magnetic stop for detachable door installation.
Aluminium end cap for 80x80 duct profile.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Panel fixing block with nut for mounting into the groove of AC 40-8 series profiles.