AC 45-8, Page 8
Product sorting
List of products
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.
Connecting plate for perpendicular connection of profiles with an edge width of 45 or 90 mm.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 32/45.
Door stop with dimensions 56x30 equipped with a magnet.
Profile for AC 45-8 groove for mounting a panel with a thickness of 9.5 mm.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Swivel castor with a diameter of 100 mm for mounting using a 60x60 flange, equipped with a brake.
Floor angle bracket for mounting on profiles with a width of 45 mm.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 32/32.
Multi-purpose profile with a height of 32 mm for profiles with AC 45-8 series grooves.
Multi-purpose profile with a height of 40 mm for profiles with AC 45-8 series grooves.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Aluminium profile with a modular section dimension of 30x30 with a special groove for installing panels or wire mesh.
Sliding profile for guiding doors made of AC 45-8 profiles with a cutting edge of 18.5 mm.
Aluminium profile with a modular section dimension of 32x32 and with 2 grooves in the shape of AC 45-8. Standard version with a weight of 1.25 kg/m.
Flange for connecting a 45x90 profile to a compressed air source, with a 1/4" thread.
Flange for connecting a 45x90 profile to a compressed air source, with a 3/8" thread.
Tripod for profiles with a 45x45 section and with the possibility of attaching 3 bases with M16 thread.
Aluminium profile with a modular cross-section dimension of 45x45 and with 4 grooves in the shape of AC 45-8. Lightweight version with a weight of 1.53 kg/m.
Aluminium profile with a modular cross-section dimension of 18.5x32 and a groove shape of AC 45-8. Lightweight version with a weight of 0.72 kg/m.
Semi-circular aluminium profile with a modular section dimension of 32x32 and 2 grooves in the shape of AC 45-8.
Aluminium profile with a modular section dimension of 32x32 and with 2 grooves in the shape of AC 45-8. Lightweight version with a weight of 1.03 kg/m.
Two-part base for mounting on profiles with 45x90, 45x135 and 45x180 sections.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Gas spring with 142 mm stroke and 100 N force.
Angle connector for joining AC 45-8 series profiles with an 18.5x32 cut at a 45° angle.
Angle connector for joining AC 45-8 series profiles with a 32x32 semi-circular cut at a 45° angle.
Plastic end cap for 45x45 profiles in black
Aluminium profile with a modular section dimension of 32x45. One side without a groove, the other sides with 3 grooves of AC 45-8 shape.
Aluminium profile with a modular section dimension of 45x60 and 4 grooves in the shape of AC 45-8. Heavy-duty version weighing 2.39 kg/m.
Aluminium profile with a modular section dimension of 45x60 and 4 grooves in the shape of AC 45-8. Lightweight version weighing 2.04 kg/m.
Aluminium profile with a modular section dimension of 45x90 and 6 grooves of type AC 45-8. Standard version with a weight of 3.00 kg/m.
Angle connector for joining AC 45-8 series profiles with a 32x32 cut at a 45° angle.
Angle connector for joining AC 45-8 series profiles with a 45x45 cut at a 45° angle.
Aluminium profile with a modular section dimension of 45x45, with rounded corners and 2 adjacent grooves in the shape of AC 45-8.
Round aluminium profile with a modular section dimension of 45x45 and with 1 AC 45-8 shaped groove.
Counterbalance weight with a mass of 1kg for mounting into AC 45-8 series profiles with a 45x90 section.
Adjustable foot 40x100 mm with M8 thread