Special offer, Page 368
Product sorting
List of products
Ball valve VL521T with female thread G 2", clearance DN50. Single-acting version with SR90 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...
Ball valve VL521T with female thread G 3", clearance DN80. Single-acting version with SR180 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...
Ball valve VL521T with female thread G 3/4", clearance DN20. Single-acting version with SR30 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...
Ball valve VL521T with female thread G 3/8", clearance DN10. Single-acting version with SR15 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...
Ball valve VL521T with female thread G 4", clearance DN100. Single-acting version with SR240 drive made of stainless steel 1.4408. Designed for pressures of 63 bar and...
Needle valves with G1 1/2" thread for gradual shut-off of high-pressure pipelines. Clearance DN 40, manual operation by handwheel. Made of steel 1.1191, graphite gasket.
Needle valves with G1 1/4" thread for gradual shut-off of high-pressure pipelines. Clearance DN 32, manual operation by handwheel. Made of steel 1.1191, graphite gasket.
Needle valves with G1/2" thread for gradual shut-off of high-pressure pipelines. Clearance DN 15, manual operation by handwheel. Made of steel 1.1191, graphite gasket.
Needle valves with G2" thread for gradual shut-off of high-pressure pipelines. Clearance DN 50, manual operation by handwheel. Made of steel 1.1191, graphite gasket.
Needle valves with G3/4" thread for gradual shut-off of high-pressure pipelines. Clearance DN 20, manual operation by handwheel. Made of steel 1.1191, graphite gasket.
Needle valves with G3/8" thread for gradual shut-off of high-pressure pipelines. Clearance DN 10, manual operation by handwheel. Made of steel 1.1191, graphite gasket.
The stainless steel sump with thermometer sleeve for the WIKA thermometer serves as a protection for the thermometer stem and as a connecting stem with a length of 200 mm....
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.
Coupling with external tapered thread 21 - R1/2". According to the DIN 2982 specification. Designed for operations with high demands on durability, longevity and hygiene....
Designed for rubber hose type 10 × 17 with a length of 25 m. The drum has an open design that allows it to be mounted in two different positions. Automatic hose retraction with...
Cast iron X-fittings with internal threads R 3" up to 25 bar. Made of tempered hot-dip galvanized cast iron. Designed primarily for water and compressed air piping according to...
X-fittings with internal threads Rp1/2". Designed for operations with high demands on durability, longevity and hygiene. Recommended applications in the chemical, pharmaceutical...
Cast iron X-fittings with internal threads R 2 1/2" up to 25 bar. Made of tempered hot-dip galvanized cast iron. Designed primarily for water and compressed air piping according...
Cast iron X-fittings with internal threads R 4" up to 25 bar. Made of tempered hot-dip galvanized cast iron. Designed primarily for water and compressed air piping according to...
Small regulator for mounting on spray guns with max. pressure 11 bar, 1/4" thread and 40 mm pressure gauge.
Small regulator for mounting on spray guns with max. pressure 11 bar, 1/4" thread and 40 mm pressure gauge.