Special offer, Page 38
Product sorting
List of products
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 100-120 mm. Manufactured according to...
Fixing angle for air handling units A2F-14, A2L-14. Attachment of filters and lubricator of A2F units to the unit body.
Hose made of PU Elastollan C-98 green, size 10/8 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60...
Female quick coupling ES DN7,2 with female pipe thread G1/4". Design in pure brass MS 58 with one-way closable valve. New mandrel contour for better seating of the anti-twist...
Air saw with 10,000 oscillations per minute, working pressure 6.3 bar and air consumption 143 l/min.
Corner socket coupling 18 mm for compressed air piping. Simple Air Push socket system that can be disassembled again. No special tools are required for installation, which is...
Nipple EC - male quick coupling DN7,2 with external metric thread M18 x 1,5. Pure brass version MS 58 with one-way closable valve at female quick coupling. New mandrel contour...
Pistol for extrusion of common cartridges of 50 mm diameter with working pressure 6.3 bar and a consumption of 143 l/min.
Female quick coupling ES DN7,2 with 1/8" male pipe thread. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel contour for better seating of the...
High quality red spiral hose 6/4 mm with extreme spiral return capability of 4 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed for...
High quality black 6/4 mm spiral hose with extreme spiral return capability of 4 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed for...
Inexpensive oil piston compressor with an output pressure of 8 bar designed especially for occasional use in craft applications and for home use. Oil-lubricated machine with 1.8...
DW hose clamps with perforated band in material finish W1 with a band width of 8.5 mm and a range of 16-27 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of...
A1E solenoid valve with 1/8" connection threads in 5/2 coil/spring design with flow rate 650 Nl/min and DN 6.5 mm clearance. Coil ASA12 and connector A12209 are not included....
Distribution block G1/4". Made of anodized aluminium with low weight, Two side threads allow air passage behind the rail or multiple connections, Outlets on one or both sides
Internal/external thread reduction G3/4" - G1 1/4". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for...
90° elbow of the Classic AIRnet series with a clearance of 63 mm. The couplings are characterised by their simple assembly. Operating pressure 13 bar, operating temperature -20...
Pipe thread reducer A003 with female thread G 1/8". External thread G 1/8". Version in brass with nickel-plated finish. Applications for fluid power, automation, measurement...
Pliers for removing couplings of the Air Push pipe system with a pipe diameter of 18 mm.
A1E solenoid valve with 1/8" connection threads in 3/2 NC version with flow rate 650 Nl/min and DN 6,5 mm clearance. Coil ASA12 and connector A12209 are not included. For...
A1E solenoid valve with 1/8" connection threads in 3/2 NO version with flow rate 650 Nl/min and DN 6,5 mm clearance. Coil ASA12 and connector A12209 are not included. For...
Nozzle set with 1.7 mm nozzle for SGH827 low pressure spray guns with HVLP system. For high efficiency of paint transfer and time-saving work. Design with 600 ml nylon upper...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 90-110 mm. Manufactured according to DIN 3016. With house and tightening...
Hose made of PU Elastollan C-98 clear, 8/5,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...
Termination box for terminating compressed air piping. Input 22 mm socket coupling and output 1 x 1/2". Easy connection of hoses, tyre tools and other accessories. Working...
Inner tube and outer shell made of SBR/NBR rubber - black, abrasion and weather resistant, diameter 49/38 mm. Reinforcement high-strength textile braid and steel spiral. Hose...
Plug with mounting and Allen tightening G1/2". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for compressed...
Straight fitting with 6/4 mm hose nut and M5 metric male thread ensures reliable connection of plastic hoses up to 15 bar. Particularly suitable for applications requiring...
Air pre-filter 0,3 um with 1/4" connection for compressed air and for neutral gases with a flow rate of 500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
Absorption filter with 0.005 um activated carbon, 1/4" connection, for compressed air and neutral gases with a flow rate of 700 l/min. Design according to ATEX II 2G2D. Maximum...
Plastic hose made of PU Elastollan C-98, clear, 8/6 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature...
Inexpensive oil piston compressor with an output pressure of 8 bar designed especially for occasional use in craft applications and for home use. Oil-lubricated machine with...
Replacement non-return valve for piston compressor. Connection to the air tank internal thread 1". Connection to the compressor external thread 1". Viton seal. Prevents backflow...
Socket coupling in straight plastic design with 1/2" male tapered thread. Internal Allen key for tightening. Quick and easy installation of plastic tubing with 16 mm outer...
Special straight socket coupling with check valve for 4 mm hose. If the hose is inserted in the coupling, the coupling is through, otherwise it closes. Designed especially for...
Hose made of PU Elastollan C-98 red, dimension 8/6 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature...
Straight fitting with cutting ring in 3/8" male thread for 12/10 mm hose. Universal fittings for use in various areas, dimensions and design meet the requirements of DIN...