BH 40-10
List of products
Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Angle bracket for joining profiles with grooves series BH 40-10, BH 45-10 and at an angle of 45° with the possibility of any adjustment.
Aluminium profile with a modular cross-sectional dimension of 40x40 and 4 grooves of BH 40-10 shape. Standard version with a weight of 1.49 kg/m.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Plastic cap for bases 084.409.004 and 084.409.002.
Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x25 made of stainless steel
Plastic cap for angle bracket 38.5x76 in black.
Aluminium profile with a modular cross-section dimension of 40x80 and with 8 BH 40-10 shaped grooves.
Aluminium profile with a modular cross-section dimension of 80x80 with 8 BH 40-10 shaped grooves. Standard version with a weight of 4.20 kg/m.
A device for precise drilling of holes into aluminium profiles with BH 40-10 and BH 50-10 grooves.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
A set of parts for the quick and secure fixing of panels for fencing made from grooved profiles of the BH 40-10, BH 45-10 and BH 50-10 series.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Angled grab bar made of grey polyamide, measuring 128x43 mm.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, blue colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Block for fixing panels with a nut for mounting into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Self-tapping threaded insert M12/M8 for creating an internal thread in the central bore of BH 40-10, 45-10 and 50-10 series profiles.
Part to prevent rotation of perpendicular connection of profiles 084.112.002.
Handle made of black polyamide, dimensions 108x38 mm.
Rubber base pad insert with a diameter of 100 mm.
Handle made of black polyamide, dimensions 146x44 mm.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Angled solid handle made of grey polyamide, measuring 128x43 mm.
Universal angle bracket with a 90° angle and dimensions of 38x38 for connecting profiles from the outside using M8x20 screws.
Plastic end cap for 80x80 profiles in grey
A sliding latch with a spring for closing doors, made of polyamide.
Mounting bracket for gas spring to aluminium profile.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x20 made of stainless steel
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Universal angle bracket with a 90° angle and dimensions of 38x36 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Horizontal alignment connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.