BH 40-10, Page 2

Plastic cap for angle bracket 40x38.5 in black.

Plastic hinge made of polyamide with dimensions 50x70, for 40/40 profiles.

Rubber insert for stop pin 084.523.003.

Threaded bushing M12/M8 for creating an internal thread in the centre bore of BH 40-10, 45-10 and 50-10 series profiles.

Clip for securing cables to aluminium profiles.

Plastic handle cover 084.505.001, orange colour.

Short nut M4 for grooves BH 40-10, BH 45-10 and BH 50-10.

Short nut M5 for grooves BH 40-10, BH 45-10 and BH 50-10.

Plastic cap for 38x36 angle bracket in grey.

Square washer 19x19 with D=12.5 mm hole.

Shimming base for block 084.510.001 with a height of 3 mm.

Spacing base for block 084.510.001 with a height of 2 mm.

Spacing base for block 084.510.001 with a height of 5 mm.

Pan head screw S12x30 made of galvanised steel

Polyamide handle with dimensions 113x35 mm, blue colour.

Angle bracket for groove for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Block for fixing panels with a nut for mounting into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.

Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.

Polyamide handle with dimensions of 113x35 mm, black colour.

Polyamide handle with dimensions 113x35 mm, orange colour.

Short nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10.

Plastic end cap for 50x50 profile in black

Short nut M6 for grooves BH 40-10, BH 45-10 and BH 50-10.

Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.

Self-tapping threaded insert M12/M8 for creating an internal thread in the central bore of BH 40-10, 45-10 and 50-10 series profiles.

Floor bracket for mounting on 40 mm wide profiles using M8 screws.

Open polyamide handle with dimensions 130x48 mm, grey colour.

Square nut M4 for BH 40-10, BH 45-10 and BH 50-10 grooves, equipped with guide and spring.

Square nut M5 for BH 40-10, BH 45-10 and BH 50-10 grooves, equipped with guide and spring.

Square nut M6 for BH 40-10, BH 45-10 and BH 50-10 grooves, equipped with guide and spring.

Square nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10, equipped with guide and spring.

Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.

Square nut M4 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.

Square nut M4 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.

Square nut M5 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.

Square nut M5 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.

Square nut M6 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.

Square nut M6 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.

Square nut M8 for BH 40-10, BH 45-10 and BH 50-10 grooves, with guide.