BH 40-10, Page 5
Product sorting
List of products
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Door stop with dimensions 56x30 equipped with a magnet.
Joining plate for creating a perpendicular connection between profiles with a 40x80 section.
Two-part base for mounting on profiles with sections 80x80, 80x120 and 80x160.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Connector for creating a swivel joint between profiles with a 40x80 section.
Gas spring with a stroke of 200 mm and a force of 250 N.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
Gas spring with 110 mm stroke and 300 N force.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Coupling for creating a pivoting joint between BH 40-10 series profiles with a 40x40 section.
Gas spring with a stroke of 200 mm and a force of 350 N.
Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Square base for mounting on 80x80 section profiles.
Angle bracket for joining profiles with grooves series BH 40-10, BH 45-10 and at an angle of 45° with the possibility of any adjustment.
A set of parts for the quick and secure fixing of panels for fencing made from grooved profiles of the BH 40-10, BH 45-10 and BH 50-10 series.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Plastic cap for angle bracket 38.5x76 in black.
Plastic cap for angle bracket 40x38.5 in black.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Grey plastic end cap for closing the groove of BH 40-10, 45-10 and 50-10 series profiles.
Door stop 40x20 with hole for magnet D=18 mm, made of grey polyamide.
A device for precise drilling of holes into aluminium profiles with BH 40-10 and BH 50-10 grooves.
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
M6 screw cap with cylindrical head and 4 mm tightening hexagon, cap diameter 10 mm.