BH 45-10, Page 7
Product sorting
List of products
Square cap for corner connector 084.310.013 made of grey polyamide.
Step drill with diameters D=9 mm and D=13.5 mm.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Swivel castor with a diameter of 100 mm for mounting using a 60x60 flange, equipped with a brake.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.
Coupling for creating a pivoting joint between profiles with a 45x45 section, with the possibility of locking using a lever.
Coupling for creating a pivoting joint between 45x90 section profiles with the possibility of locking by tightening the Allen screw.
Threaded sleeve M5, D = 7 mm.
M18x0.75 threaded magnet for removable door installation.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Two-part base for mounting on profiles with 45x90, 45x135 and 45x180 sections.
Two-part base for mounting on profiles with sections 90x90 and 90x180.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
M8x50 zinc-plated steel cylindrical head screw
Aluminium profile with a 30x50 section for creating fencing.
Aluminium profile with a 50x50 section for creating fencing.
Drill bit with a diameter of D=7 mm for creating holes for M5 threaded inserts.
Pipe for creating a handle, diameter D=32 mm, made of blue lacquered aluminium.
Base with a diameter of 100 mm and an M20 connection thread. Base load capacity 2200 kg.
Angle bracket for mounting limit switches with order numbers 084.601.001 to 084.601.003 and switch 084.602.001.
Handle made of black polyamide with orange inserts, dimensions 115x35 mm.
Drill bit with a diameter of D=11 mm for creating holes for M8 threaded inserts.
Drill bit for aluminium with a diameter of D=5.5 mm.