BH 50-10, Page 4
Product sorting
List of products
Horizontal alignment connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Universal angle bracket with a 90° angle and dimensions of 95x88 for connecting profiles from the outside using M8x16 screws.
Gas spring with 110 mm stroke and 300 N force.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
Door stop for removable door installation, made of brass.
Polyamide handle with dimensions of 113x35 mm, black colour.
Polyamide handle with dimensions 113x35 mm, orange colour.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Gas spring with 110 mm stroke and 150 N force.
Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8/M10 screws. Design with guide tabs.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.
Flange for attaching bases and castors to BH 50-10 series profiles with a 100x100 section and M16 thread.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 200 N force.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 45° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 90° angle.
Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.
Plastic end cap for 50x50 profile in black
Multi-purpose profile for defining 2 grooved profiles, BH 45-10 and BH 50-10 series.
Multi-purpose profile with a height of 40 mm for profiles with a groove series BH 45-10 and BH 50-10.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Aluminium hinge with dimensions 81x80, for 45/45 profiles.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Angle bracket for joining profiles with grooves series BH 40-10, BH 45-10 and at an angle of 45° with the possibility of any adjustment.
Block for fixing panels with a nut for mounting into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.
Square base for mounting on profiles with a 50x50 section. Attachment to the profile from three sides.