.png)
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
_(1).jpg)
.png)
.jpeg)
.png)
EWO
 |
100 years of experience and global exports
Emil Wolf founded the company EWO in 1914, at that time it focused on equipping workshops and manufacturing companies. The company then experienced a major change successively in 1939, 2002 and 2006. However, each time it is about changes that move the business forward and towards its customers. Even after more than a century of existence, the company EWO has not lost its innovative pace, and modern technologies and continuous research are key factors in the company's success. As a result, it now exports its products to more than 60 countries on five continents, thanks to an extensive distribution network. In the factory near Stuttgart, Germany, around 80 employees are responsible for the production of compressed air treatment units, workshop and tire service equipment, autogenous technology and accessories, and special high-pressure applications.
EWO in the workshop and at the gas stationThe products of the company EWO will satisfy the needs of both large industrial companies and smaller tradespeople or DIYers. The EWO brand can be found at many gas stations, car service stations, or workshops. In the automotive sector, you can find classic tire inflators, pressure gauges, various types of nozzles and a wide range of pressure regulators - all of which can be found in our online shop Compressors Air. |
 |
Basic nozzle GN-B with centrally located 1.5 mm diameter hole. Concentrated air flow with high force. Noise level up to 90 dB (A) at pressures up to 4 bar.
Extended curved nozzle GN-LSF for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm. Combination of safety nozzle...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
High pressure regulator 3/8" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 3.0 - 50...
Curved long GNLB-160 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 160 mm.
Curved long GNLB-110 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 110 mm.
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
Robust all-metal blow gun with forged aluminium body and flow control, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle...
Extended curved nozzle GN-LG for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm. Equipped with a rubber...
Soundproof safety nozzle GN-SF combines the safety nozzle function with the soundproof function. The nozzle forms a protective shield, preventing dirt from flying towards the...
GN-T air shield nozzle equipped with a night drilling system that splits the beam and creates a partially protective air shield to prevent small debris from flying towards the...
The GN-S soundproof nozzle is equipped with a sintered bronze inner liner that separates the airflow and slows it down, thus reducing noise. Noise level only up to 70 dB (A) and...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a basic nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread. Air...
Robust all-metal blowgun with forged aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Lightweight blow gun with hardened polyamide body for long life. Only the gun body without nozzle and connection. Nozzle M12 x 1.5. Air connection 1/4" internal thread. Low...
Blow gun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 - possibility of...
High-quality blast gun for rust removal by blasting with abrasive sand in areas where the surface cannot be sandedand prepare it for painting. Designed for abrasives with grain...
500 mm long hose with double-sided valve as accessory for the TG-09 wheel inflator. Connection of the hose with G1/4" thread.
The tire inflator is used for easy filling of compressed air into tires of cars, motorcycles, bicycles, etc. The Pneulight is equipped with a sufficient layer of rubber around...
Replacement plastic container cap for SBG12 blast gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg...
Replacement bottom plastic container 750 ml for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1...
Replacement hardened steel nozzle for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of...
Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of abrasive. Nozzle made of hardened steel with a...
Treatment unit consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 11 660 l/min in 2" size and inlet pressure up to 25 bar. Designed for...
Treatment unit consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 11 660 l/min in 2" size and inlet pressure up to 16 bar. Designed for...
Treatment unit consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 11 660 l/min in 1 1/2" size and inlet pressure up to 25 bar. Designed for...
Treatment unit consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 11 660 l/min in 1 1/2" size and inlet pressure up to 16 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6670 l/min in 1 1/2" size and inlet pressure up to 25 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6670 l/min in 1 1/2" size and inlet pressure up to 16 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6670 l/min in 1 1/4" size and inlet pressure up to 25 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6670 l/min in 1 1/4" size and inlet pressure up to 16 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6000 l/min in 1" size and inlet pressure up to 25 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6000 l/min in 1" size and inlet pressure up to 16 bar. Designed for...
Treatment units consisting of pressure regulator, filter and oiler with a maximum possible flow rate of 6000 l/min in 3/4" size and inlet pressure up to 25 bar. Designed for...
Page 1 of 8 - 296 items total
.svg?676e60b7)
