Compressed air hose, Page 16
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Blue hose with dimensions 14/12 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 32-50 mm. Manufactured according to...

Fixed fitting with G1/4" female pipe thread for 4 x 6 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.

FoxiPro PUR XL 40 mm diameter suction hose made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with a steel wire spiral. Smooth inside for exceptional abrasion...

Deformation hose coupling EWD1 with a range of 37 to 40 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...

ES male quick coupling male DN7,2 with coupling nut and protective spring for 9 x 12 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling. New...

Vacuum hose with inner diameter 20 mm and working temperature -5/+65°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

PW4 31mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 47mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

FoxiPro PUR L suction hose with a diameter of 51 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm with straight and...

FoxiPro PUR L suction hose with a diameter of 26 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

FoxiPro PUR L suction hose with a diameter of 45 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...

FoxiPro PUR L suction hose with a diameter of 38 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Designed for TPU 8 × 12 hose type with a length of 30 m. The drum is made of galvanized steel, which is powder-coated and UV-resistant. Supplied with 2 m supply hose. Total...

EGW deformation hose coupling with a range of 14.6-16.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Hose clamp PW1 174 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 180-200 mm. Manufactured according to DIN 3016. With house and...

Hose clamps with perforated belt in material finish W4 with a belt width of 8 mm in the range of 25-40 mm. According to SAE standard with house and tightening screw and hexagon...

Hose made of PU Elastollan C-98 clear, 12/9 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 6 x 4 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel...

Plastic polyurethane hose 12/8 mm made of Elastollan 1198. Blue in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....

Blue hose with 15/12 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Hose clamp PW1 130 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Vacuum hose with inner diameter 102 mm and working temperature -5/+60°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2000 mm with straight and...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2500 mm and straight ends.

Clear hose with dimensions 10/6 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 10 x 6,5 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 9 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 70-90 mm. Manufactured according to DIN 3016. With house and...

Hose clamp PW1 213 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

PW4 51mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm with straight and...