Compressed air hose, Page 20
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Product sorting
List of products
The inner length is 1 980 mm and the calculated length is 2 010 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
SW4 50mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Polyamide PA12 4/2 mm tubing in black anti-static version with ATEX II 2 G/D certification. Operating temperature -30/+80 °C. Tubing for applications with demanding safety...
Fixed fitting with G1/4" female pipe thread for 4 x 6 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.
FoxiPro PUR L suction hose with a diameter of 60 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
The blue plastic spiral hose 10/6.5 mm polyurethane in 5 m length is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...
PW4 28mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 8-12 mm. Manufactured according to...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 90-110 mm. Manufactured according to DIN 3016. With house and tightening...
Hose clamp designed for hose diameters 60-215 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 8 x 5 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
The blue plastic spiral hose 10/6.5 mm polyurethane, 10 m long, is characterized by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...
DW hose clamps with perforated band in material finish W1 with band width 12,7 mm and range 50-70 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of galvanized...
FoxiPro PUR L suction hose with a diameter of 120 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...
Blue-black plastic hose with 4/2,5 mm. Made of branded Elastollan C98 granulate. Suitable for multiple connections to pneumatic cylinders and valves. Operating temperature...
Hose made of PU Elastollan C-98 cyan, size 8/5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses in the range of 70-90 mm. Manufactured according to DIN 3016. With house and tightening...
Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and tightening...
The inner length is 940 mm and the calculated length is 970 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm and straight ends.
EGW deformation hose coupling with a range of 13.9-16.1 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 140-160 mm. Manufactured according to DIN 3016. With house and tightening...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 203 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
Multi-purpose black hose with blue stripe in 15/8 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...
Hose clamp designed for hose diameters 60-110 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Suction hose PUR1 with a diameter of 160 mm made of abrasion-resistant polyurethane foil with a steel wire spiral. Designed for suction and ventilation of air, non-aggressive...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 76 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and tightening...
The inner length is 1 098 mm and the calculated length is 1 120 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...