Compressed air hose, Page 21
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Product sorting
List of products
High-quality pressure-suction hose for water and liquids, with an inner diameter of 51 mm and an operating temperature of -25/+60°C, for low-temperature work. Reinforced with...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 25-40 mm. Manufactured according to...
PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 63mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
PW4 47mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 90 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...
Hose clamp PW1 252 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Hose clamp designed for hose diameters 25-45 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
FoxiPro PUR L suction hose with a diameter of 55 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
SW4 35mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2000 mm with straight and...
The blue plastic spiral hose 8/5 mm polyurethane, 15 m long, is characterised by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and tightening...
Plastic polyurethane hose 12/8 mm made of Elastollan 1198. Blue in colour yet transparent for better UV resistance. Operating temperature -40/+60 °C with hardness 49-55 °Sh....
Fixed fitting with G1/4" female pipe thread for 4 x 6 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and tension.
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm and straight ends.
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 70-90 mm. Manufactured according to...
Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and tightening...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 6 x 4 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
FoxiPro PUR L suction hose with a diameter of 70 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...
High-quality yellow spiral hose 12/8 mm with extreme spiral return capability of 10 m and long service life, including end quick couplers. Made of branded granular elastollan...
Hose clamp PW1 200 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...