Compressed air hose, Page 21
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
_(1).jpg)
.png)
Product sorting
List of products
The inner length is 978 mm and the calculated length is 1 000 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 038 mm and the calculated length is 1 060 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 098 mm and the calculated length is 1 120 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 123 mm and the calculated length is 1 145 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 30-45 mm. Manufactured according to DIN 3016. With house and...
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 230-250 mm. Manufactured according to DIN 3016. With house and...
FoxiVulca Sil1 60 mm diameter suction hose made of fibreglass-coated silicone with steel wire spiral. Single-layer design. Designed for the transport of high temperature gases,...
PW4 103mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Professional hose for hot and cold water and low concentrations of chemicals with diameters of 19.5 mm outer and 12.7 mm inner in blue. Compatible with Push Lock systems,...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 50-70 mm. Manufactured according to...
Suction hose PUR1 with a diameter of 102 mm made of abrasion-resistant polyurethane foil with steel wire spiral. Designed for suction and ventilation of air, non-aggressive...
Designed for TPU hose type 10 × 14 with a length of 12 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...
Designed for TPU 8 × 12 hose type with a length of 15 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...
The inner length is 1 143 mm and the calculated length is 1 165 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Hose clamp designed for hose diameters 60-215 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 32-50 mm. Manufactured according to...
The inner length is 1 158 mm and the calculated length is 1 180 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 168 mm and the calculated length is 1 190 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 140-160 mm. Manufactured according to DIN 3016. With house and...
Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 220-240 mm. Manufactured according to DIN 3016. With house and...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 240-260 mm. Manufactured according to DIN 3016. With house and...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 40-60 mm. Manufactured according to...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2000 mm with straight and...
Hose clamp designed for hose diameters 60-325 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 26,2/19 mm red. Special pressure hoses for easy assembly without the need for hose...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...
LPH press ring with a diameter of 28 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
PW4 85mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion, dimensions 54/38 mm. Outer shell made of SBR rubber - black, abrasion and weather...
Polyamide PA12 12/10 mm tubing in black anti-static version with ATEX II 2 G/D certification. Operating temperature -30/+80 °C. Tubing for applications with demanding safety...
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 70-90 mm. Manufactured according to DIN 3016. With house and...
Polyamide PA12 6/4 mm tubing in black anti-static version with ATEX II 2 G/D certification. Operating temperature -30/+80 °C. Tubing for applications with demanding safety...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 15,7/10 mm green. Special pressure hoses for easy assembly without the need for hose...
Strength hose clamp SW1 - 40mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber...
The inner length is 1 180 mm and the calculated length is 1 210 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 6 x 4 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel...
SW4 35mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Clear hose with 18/14 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...