Compressed air hose, Page 23
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Product sorting
List of products
Designed for rubber hose type 10 × 17 with a length of 25 m. The drum has an open design that allows it to be mounted in two different positions. Automatic hose retraction with...
The inner length is 1 520 mm and the calculated length is 1 550 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Fixed quick coupling nipple with protective spring for 5 x 8 mm hose in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized...
High-quality blue spiral hose 6/4 mm with extreme spiral return capability of 4 m and long service life, including end quick couplings. Made of branded granular elastollan 1190....
Fixed fitting with male tapered thread R1/4" for hose size 6.5 x 10 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure...
Multi-purpose black hose with blue stripe in 35/25 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...
Hose clamp SW4 195mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...
Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses in the range of 25-40 mm. Manufactured according to DIN 3016. With house and...
Hose clamp designed for hose diameters 60-110 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
FoxiPro PUR L suction hose with a diameter of 170 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...
Pliers for mounting EW deformation clamps.
Fixed quick coupling with protective spring for 4 x 6 mm hose in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
SW4 115mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
FoxiPro PUR XL suction hose with a diameter of 51 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...
FoxiPro PUR XL 55 mm diameter suction hose made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with a steel wire spiral. Smooth inside for exceptional abrasion...
Fixed quick coupling with protective spring for hose 8 x 12 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
Swivel fitting with female pipe thread G3/8" for hose size 9 x 13 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
PW4 200mm strength hose clamp with tightening bolt located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Fixed quick coupling with protective spring for 5 x 8 mm hose in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
FoxiPro PUR L suction hose with a diameter of 80 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2500 mm and straight ends.
The inner length is 1 730 mm and the calculated length is 1 770 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
FoxiPro PUR XL suction hose with a diameter of 102 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...
Fixed quick coupling nipple with protective spring for hose 6.5 x 10 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is...
FoxiPro PUR L suction hose with a diameter of 51 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Hose clamp PW1 103 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 90-110 mm. Manufactured according to DIN 3016. With house and tightening...
The inner length is 1 710 mm and the calculated length is 1 740 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 910 mm and the calculated length is 1 940 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...