Compressed air hose, Page 25
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Designed for TPU 8 × 12 hose type with a length of 12 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and tightening...

The blue plastic spiral hose 12/8 mm polyurethane, 1 m long, including fitted hose ends, is characterized by high resistance to breakage, abrasion and pressure. The small...

FoxiPro PUR XL suction hose with a diameter of 115 mm made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with a steel wire spiral. Smooth inside for exceptional...

PW4 174mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

DW hose clamps with perforated tape in material finish W2 with a tape width of 8.5 mm and a range of 40-60 mm. House and tightening screw and hexagon SW 6 mm. Stainless steel...

Serrated V-belt with a calculated length of 962 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.

Designed for TPU hose type 10 × 14 with a length of 12 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length...

Serrated V-belt with a calculated length of 1 382 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.

Deformation hose clamp EWS4 range 8,1 to 9,5 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

PW4 187mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 200mm strength hose clamp with tightening bolt located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 213mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 161mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

The blue plastic spiral hose 10/6.5 mm made of polyurethane in a length of 7.5 m is characterized by high resistance to breakage, abrasion and pressure. The small diameter of...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2000 mm and straight ends.

High-quality black 6/4 mm spiral hose with extreme spiral return capability of 4 m and long service life, including end quick couplings. Made of branded granular elastollan...

PW4 148mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

SW4 260mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Blue-black plastic hose, 12/9 mm. Made of branded Elastollan C98 granulate. Suitable for multiple connections to pneumatic cylinders and valves. Operating temperature -40/+60 °C...

FoxiPro PUR L suction hose with a diameter of 115 mm made of abrasion-resistant polyester-polyurethane foil 1.45 mm thick with a steel wire spiral. Designed for granulate...

PW4 226mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 73mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 97mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Multi-purpose black hose with blue stripe, 44/32 mm diameter. Shell and jacket made of black EPDM, wrapped with synthetic yarn, operating temperature -40/+95 °C, short-term up...

Hose endless belt with a width of 14 mm and a length of 25 m. Also included are 50 locks for custom use of individual lengths. Supplied in stainless steel. Designed for the...