Compressed air hose, Page 27
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
_(1).jpg)
.png)
Product sorting
List of products
Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 70-90 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 23/16 mm red. Special pressure hoses for easy assembly without the need for hose...
PW4 200mm strength hose clamp with tightening bolt located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
PW4 213mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
FoxiVulca Sil1 suction hose with a diameter of 83 mm made of fibreglass-coated silicone with a steel wire spiral. Single-layer design. Designed for the transport of high...
The inner length is 1 960 mm and the calculated length is 1 990 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Hose clamp for attaching right-hand spiral suction hose in the range 72-92 mm with 12 mm wide strap. Easy assembly and perfect sealing thanks to the bridging element over the...
The inner length is 1 630 mm and the calculated length is 1 660 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 670 mm and the calculated length is 1 700 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 730 mm and the calculated length is 1 760 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 810 mm and the calculated length is 1 840 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Serrated V-belt with a calculated length of 1 382 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
High-quality blue spiral hose 10/6.5 mm with extreme spiral return capability of 2.5 m and long service life, including end quick couplings. Made of branded granular elastollan...
The inner length is 1 193 mm and the calculated length is 1 215 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 228 mm and the calculated length is 1 250 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 245 mm and the calculated length is 1 267 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 298 mm and the calculated length is 1 320 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 318 mm and the calculated length is 1 340 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 348 mm and the calculated length is 1 370 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 890 mm and the calculated length is 1 920 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Fixed quick coupling with protective spring for hose 9 x 13 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 120-140 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...
SW4 115mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
The inner length is 1 860 mm and the calculated length is 1 890 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 910 mm and the calculated length is 1 940 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 930 mm and the calculated length is 1 960 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 970 mm and the calculated length is 2 000 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 980 mm and the calculated length is 2 010 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 2 010 mm and the calculated length is 2 040 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 710 mm and the calculated length is 1 740 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 760 mm and the calculated length is 1 790 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Quick coupling swivel with protective spring for hose 6.5 x 10 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
FoxiFoxiVulca Neo2 suction hose with a diameter of 41 mm made of fibreglass-coated neoprene with a steel wire spiral. Two-layer design. Designed especially for places with high...
The inner length is 1 500 mm and the calculated length is 1 530 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
FoxiSpecial Car-Memory 102 mm diameter exhaust hose made of temperature-resistant plastic with plastic profile spiral. Smooth inside for exceptional abrasion resistance and to...
The inner length is 1 730 mm and the calculated length is 1 770 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
High-quality blue spiral hose 8/5.5 mm with extreme spiral return capability of 2.5 m and long service life. Made of branded granulate elastollan 1190 without end quick...
High-quality blue spiral hose 6/4 mm with extreme spiral return capability of 4 m and long service life. Made of branded granulate elastollan 1190 without end quick connectors....