Compressed air hose, Page 48
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Hose clamp SW1 - 70 mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Red hose with dimensions 10/6,5 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

The inner length is 2 470 mm and the calculated length is 2 500 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 2 500 mm and the calculated length is 2 530 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Standard fire hose in white, certified according to DIN 14811 class 1. Supplied in performance class L2. Made of 100% synthetic polyester yarn with a black EPDM inner liner in a...

EGW deformation hose coupling with a range of 4.7-5.7 mm and a tape width of 5.5 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

High quality black 10/6.5 mm spiral hose with extreme spiral return capability of 2.5 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed...

High quality yellow spiral hose 10/6.5 mm with extreme spiral return capability of 2.5 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed...

Green hose with dimensions 10/7 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

FoxiPro PUR XL suction hose with a diameter of 38 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...

PWD 67 - 75 mm strength hose clamps with two tightening screws located on the hose clamp. High tightening torque for hoses with large diameters. Made of : Stainless steel strip...

Black plastic spiral hose 10/7.5 mm, 3 m long, including 1/4" end fittings for hazardous areas according to directives 94/9/EG (ATEX). External surface resistance R < 106 Ohm,...

Black plastic spiral hose 8/6 mm, 3 m long, including 1/4" end fittings for hazardous areas according to directives 94/9/EG (ATEX). External surface resistance R < 106 Ohm,...

Black plastic spiral hose 10/7.5 mm in length 3 m without end caps for hazardous areas according to directives 94/9/EG (ATEX). External surface resistance R < 106 Ohm, resists...

Black plastic spiral hose 12/9 mm in length 3 m without hose ends for hazardous areas according to the directives 94/9/EG (ATEX). External surface resistance R < 106 Ohm,...

Black plastic spiral hose 8/6 mm in length 3 m without hose ends for hazardous areas according to directives 94/9/EG (ATEX). External surface resistance R < 106 Ohm, resists...