Hose clamps for fixing hoses, Page 8
-
Worm buckles W; with pressed strip
-
HTW hose clamps; with high tightening torque
-
DW hose clamps; with perforated band
-
BW endless belts; for individual buckle production
-
Hose clamps QLW; with snap-on house
-
PMW hose clamps; miniature strength design
-
Hose clamps PW; strength design
-
Mounting brackets KW; version with rubber insert
-
Hose clamps SW; wire version
-
Hose clamps PUW; suction hose PUR1
-
Hose clamps FXW;extraction hoses with 0.4 to 0.75 mm wall
-
FXPW hose clamps; suction hoses with wall from 1.45 mm
-
Hose clamps PWD2; strength version with two screws
-
Hose clamps EW; deformation version with eyelets
-
Hose clamps FW; spring design smooth inside
-
EGW hose clamps; deformation version with insert
-
Hose clamps CBW; deformation lock design
-
FBW hose clamps; spring version
-
LPH press rings; low pressure design
-
Hose clamp stands; practical stands
Bestsellers

PW4 63mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 51mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 20-32 mm. Manufactured according to...

PW4 252mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

PW4 73mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp PW1 226 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 190-210 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hose range 210-230 mm. Manufactured according to DIN 3016. With house and tightening screw and...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 220-240 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses in the range of 80-100 mm. Manufactured according to DIN 3016. With house and tightening...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 120-140 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses in the range of 25-40 mm. Manufactured according to...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 120-140 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Stainless steel hose clamp for attaching suction hose with right-hand spiral and foil construction in the range of 100-120 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect...

Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 180-200 mm. Manufactured according to DIN 3016. With house and...

PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp PW1 91 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...

Pliers for mounting EW deformation clamps.

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and...

Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and...

Deformation hose clamp EWS4 range 14,6 to 16,8 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 130-150 mm. Manufactured according to...

Deformation hose clamp EWS4 range 6,1 to 7,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Deformation hose coupling EWD1 with a range of 20 to 23 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Deformation hose coupling EWD1 with a range of 25 to 28 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

EGW deformation hose coupling with a range of 10.3-12.3 mm and a tape width of 7.4 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range of 16-27 mm. According to SAE standard with house and tightening screw and...