Aluminum profiles and accessories, Page 8

Aluminium profile with a modular cross-sectional dimension of 30x30 and 4 grooves in the shape of AC 30-6.

Universal angle bracket with a 90° angle and dimensions of 86x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.

Universal angle bracket with a 90° angle and dimensions of 86x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.

Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.

Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.

Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.

Corner connector for connecting 3 profiles of the AC 45-8 or BH 45-10 series with a 45x45 cut at a 90° angle.

Aluminium end cap for 80x80 duct profile.

Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.

Flange for blanking off the end of a 45x90 profile connected to a compressed air source.

Flange for attaching bases and castors to AC 30-6 and IM 30-6 series profiles with a 30x60 section, equipped with an M12 thread.

Flange for attaching bases and castors to BH 30-8 series profiles with a 30x60 section, equipped with an M12 thread.

Flange for attaching bases and castors to 40x80 profiles with M16 thread.

Flange for attaching bases and castors to AC 45-8 series profiles with a 90x90 section and M16 thread.

Flange for attaching bases and castors to BH 45-10 series profiles with a 90x90 section and M16 thread.

Connector for joining AC 40-8 and AC 45-8 series profiles in a horizontal direction at any angle.

The 45x45 aluminium profile allows for the creation of channels with cables.

Groove connector for direct connection of AC 40-8 and AC 45-8 series profiles.

Coupling for creating a pivoting joint between round profiles of the AC 30-6 series with a 30x30 section.

Coupling for creating a pivoting joint between profiles of the AC 30-6 or IM 30-6 series with a 30x30 section.

Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.

Coupling for connecting profiles of the AC 40-8 and AC 45-8 series in the vertical direction at any angle.

Grey plastic end cap for closing the groove of BH 40-10, 45-10 and 50-10 series profiles.

Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.

Universal angle bracket with a 90° angle and dimensions of 59x59 for connecting profiles from the outside using M6x16 screws.

Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.

Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.

Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.

Corner connector for connecting 2 round profiles 084.101.037 from the AC 45-8 series at a 90° angle.

Profile for creating doors from panels with a thickness of 4-5 mm. Mounting into the groove of AC 45-8 series profiles.

Connector for creating perpendicular joints of round profiles of the AC 30-6 series with a 30x60 cut in 2 axes using groove fixation.

Coupling for creating perpendicular joints of round profiles series AC 45-8 with a 45x90 cut in 2 axes.

Coupling for creating perpendicular joints of round profiles series AC 45-8 with a 45x90 cut in 2 axes.

Connector for creating perpendicular joints between round profiles of the AC 45-8 series with a 45x90 section.

Plastic hinge made of polyamide with dimensions 40x40, for profiles 32/32.

Groove connector for direct connection of AC 40-8 and AC 45-8 series profiles.

Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.

Adjustable foot 40x100 mm with M8 thread

Aluminium hinge with dimensions 55x42, for profile 30/panel.

Semi-circular aluminium profile with a modular section dimension of 45x45 and 2 AC 45-8 shaped grooves.