Aluminium Profile AC 45-8, 45x45, with 3 Grooves
Code: 084.101.036
Product detailed description
Aluminium profile with a square section designed for creating standard structures.
Connection thanks to the 3 grooves on the sides of the profile.
The side without a groove prevents contamination and improves the appearance of the structure.
Made from EN AW 6060 T5 aluminium alloy, anodised layer of more than 12 microns, tolerance according to EN 12020-2.
Available in large packs - small bundle of 2 bars, large bundle of 80 bars.
Compatibility
This product can replace the following products on the market:
| Code | Ord. C. | Note |
|---|---|---|
| ALU | 134545 | weight 1.63 kg/m |
| DRE | 01.4545.L3A / BPRDD0000155 | weight 1.663 kg/m |
Warning: the alternative product we offer may have technical deviations from the original product. Please contact us to explain the differences.
Joining profiles
The choice of fixings between different profiles is very important in any assembly structure. The customer can choose from various solutions depending on the required implementation time or the nature of the load or load-bearing capacity.
1. Joining with screws in the groove
This is the simplest and fastest way to assemble. This connection system guarantees good perpendicularity between two surfaces (depending on the profile cut) and good resistance of the mutual connection in the transverse direction to the groove.
2. Joining with a continuous screw from the outside of the profile
This is the strongest method of joining, resistant to mutual movement between two profiles. This method of joining provides better perpendicularity of the joint (which, however, depends very much on the care taken in the quality of the cut). This system does not allow movement of parts in the event of screw loss. Drilling the hole can be done with a pistol drill with two diameters.
3. Joining with joints or angles
This method of joining is usually used where the greatest possibilities of adjustment and easy installation are required. Technical specifications for all products can be found in the product details of the relevant accessory.
Profile threads
It is recommended to respect the depth indicated in the table when creating a thread:
| Profile | Screw diameter | Recommended depth (mm) |
| slot 6 | M6 | 15 |
| slot 8 | M8 | 25 |
The maximum tightening torques recommended for screws used in the ALUSIC system are:
| Profile | Screw diameter | Max. recommended tightening torque (Nm) |
| slot 6 | M6 | 10 |
| slot 8 | M8 | 20 |
Compatible accessories for all types of panel connections can be found in the related products tab
Additional parameters
| Category: | Aluminum profiles AC 45x45 |
|---|---|
| Warranty: | 2 years |
| Shape: | standardní |
| Hmotnost (kg/m): | 1.66 |
| Řez profilu: | 45×45 |
| Série: | AC 45-8 |
| Skladem: | Externí sklad |
| Material: | anodized aluminum |
| Color: | natural |
| Profile length (mm): | 6 040 |
| Moment of inertia lx (cm⁴): | 11,32 |
| Moment of inertia ly (cm⁴): | 11,94 |
| Sectional moment wx (cm³): | 5,03 |
| Section moment wy (cm³): | 5,30 |
| Cutting area (mm²): | 616 |
| Minimum length (mm): | 30 |
| Maximum length (mm): | 6 000 |
| Rust: | CUT-A |
| Cut link: | /profile-a-corrosion/ |
Hliníkové profily Alusic
Be the first who will post an article to this item!
Be the first who will post an article to this item!