IM 30-6, Page 3
Product sorting
List of products
Gas spring with a stroke of 200 mm and a force of 250 N.
Gas spring with a stroke of 200 mm and a force of 350 N.
Aluminium hinge with dimensions 50x50, for profiles 30/30, 32/32.
Gas spring with 110 mm stroke and 300 N force.
Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.
Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.
Shimming base for block 084.510.001 with a height of 3 mm.
Aluminium profile with a modular cross-section size of 60x60 and with 8 IM 30-6 shaped grooves.
Plastic cap for 27x27 angle bracket in black.
Plastic cap for angle bracket 27x27 in grey.
Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.
Clip for securing cables to aluminium profiles.
Door stop 30x14 with hole for magnet D=18 mm, made of grey polyamide.
Floor bracket for mounting on profiles with a width of 30 mm.
Plastic handle cover 084.505.001, orange colour.
Plastic end cap for 30x30 profiles in black
Plastic end cap for 30x60 profiles in grey
M4 nut with ball for mounting in IM 30-6 groove, made of galvanised steel.
M5 nut with ball for mounting in IM 30-6 groove, made of galvanised steel.
IM 30-6 groove screw with dimensions M6x50, made of stainless steel
M6 nut with ball for mounting into IM 30-6 groove, made of galvanised steel.
PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.
PVC seal for profile grooves for attaching 4 mm thick panels to 6 mm wide grooves or 6 mm thick panels to 8 mm grooved profiles.
PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.
IM 30-6 T-slot bolt with dimensions M6x40, made of stainless steel
Spacing base for block 084.510.001 with a height of 2 mm.
Spacing base for block 084.510.001 with a height of 5 mm.
Coupling for creating a pivoting joint between profiles of the AC 30-6 or IM 30-6 series with a 30x30 section.
Aluminium drill bit with a diameter of D=7.5 mm.
Part to prevent rotation of perpendicular connection of profiles 084.112.002.
Angle bracket for mounting limit switches with order numbers 084.601.001 to 084.601.003 and switch 084.602.001.
Swivel castor with a diameter of 100 mm for mounting using a 60x60 flange, equipped with a brake.
Drill bit with a diameter of D=7 mm for creating holes for M5 threaded inserts.
Handle made of black polyamide with orange inserts, dimensions 115x35 mm.