IM 40-8

Corner connector for connecting 3 profiles of the AC 40-8, BH 40-10 or IM 40-8 series with a 40x40 section at a 90° angle.

Angle bracket for joining profiles with a 40x40 section at a 45° angle.

Aluminium profile with a modular section dimension of 80x80 with 8 IM 40-8 shaped grooves. Heavy-duty version weighing 7.25 kg/m.

Floor bracket for mounting on 40 mm wide profiles using M8 screws.

Plastic cap for bases 084.409.004 and 084.409.002.

Connecting plate for perpendicular connection of 3 profiles with an edge width of 40 or 45 mm.

Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x40 section.

Aluminium cover for chamfered channel profile 80x80 with IM 40-8 grooves.

Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.

Plastic cap for angle bracket 38.5x76 in black.

Aluminium profile with a modular section size of 40x120 and 8 IM 40-8 shaped grooves. Heavy-duty version weighing 5.11 kg/m.

Aluminium profile with a modular cross-section dimension of 40x160 and with 10 IM 40-8 shaped grooves. Heavy-duty version weighing 8.55 kg/m.

Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x80 section.

Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.

Set of parts for quick and secure fixing of panels for fencing made of grooved profiles series IM 40-8.

Aluminium profile with a modular section dimension of 40x40, featuring a special groove for installing panels or wire mesh.

Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.

Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.

Polyamide handle with dimensions of 113x35 mm, black colour.

Polyamide handle with dimensions 113x35 mm, blue colour.

Polyamide handle with dimensions 113x35 mm, orange colour.

Jig for precise drilling of holes into aluminium profiles with IM 40-8 groove.

Universal angle bracket with a 90° angle and dimensions of 25x80 for connecting profiles from the outside using M8x20 screws.

Long T-slot nut with ball IM 40-8 with 2 M8 threads, made of galvanised steel.

Part to prevent rotation of perpendicular connection of profiles 084.112.002.

Handle made of black polyamide, dimensions 108x38 mm.

Rubber base pad insert with a diameter of 100 mm.

Long T-nut with ball spring for IM 40-8 slot with 2 M6 threads, made of galvanised steel.

Handle made of black polyamide, dimensions 146x44 mm.

Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.

Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.

Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.

Angled solid handle made of grey polyamide, measuring 128x43 mm.

Universal angle bracket with a 90° angle and dimensions of 38x38 for connecting profiles from the outside using M8x20 screws.

Plastic cover for 80x80 profiles in black

Plastic end cap for 80x80 profiles in grey

A sliding latch with a spring for closing doors, made of polyamide.