Measurement of pressure and temperature of the medium, Page 9
-
Manometers; for measuring the pressure of a medium
-
Thermometers; for temperature measurement
-
Pressure sensors; pressure transducers and switches
Bestsellers
List of products
The reducer is equipped with an internal thread M12 × 1.5 and an external thread G 1/4".
The working pressure is 25 bar. Connection is M20 × 1.5. The body of the tap is made of brass.
glycerine manometer with 0/16 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...
Stainless steel gauge with 100 mm indicator with pressure measurement range 0/25 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...
The reducer is equipped with internal thread G 1/2" and external thread M20 × 1.5.
glycerine manometer with 0/600 bar range. Indicator diameter 100 mm with side connection M20 x 1,5. Glycerine filling makes it easier to read the measured pressure for pressure...
The rugged MRS manometer with a 100 mm pointer diameter is designed to measure the pressure of non-aggressive media in the range of 0 to 160 bar. This shockproof instrument...
Stainless steel manometer with 160 mm gauge and pressure measurement range 0/25 bar with 1.0% deviation. Side connection 1/2". Suitable for demanding aggressive media for...
Stainless steel glycerine manometer with 63 mm pointer with pressure measurement range -1/0 bar with 1.6% deviation. Rear connection 1/4". Suitable for demanding aggressive...
glycerine manometer with 0/16 bar range. Indicator diameter 100 mm with side connection M20 x 1,5. Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with 0/250 bar range. Indicator diameter 100 mm with side connection M20 x 1,5. Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with range -1/0 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....
glycerine manometer with 0/400 bar range. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....
glycerine manometer with a range of 0/1.6 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with a range of 0/1.6 bar. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with a range of 0/2.5 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with 0/400 bar range. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...
The WIKA DMUB pressure transducers with a range of 0 to 16 bar are designed to convert pressure to a continuous electrical value. Accuracy tolerance 1.0%. Protection IP65, input...
Protective cap - Overpressure - DRSB. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions. Switching differential from 15 to 20%, IP65 protection,...
Plastic manometer with 100 mm diameter, side thread connection G1/2" and 0/10 bar range. Designed for pressure measurements of non-aggressive media with lower demands on the...
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.
The nipple has a pin for an M20 × 1.5 nut on one side and a sleeve on the other. The material of the nipple is stainless steel 1.4571.
The MAKP-1V-18 digital pressure gauge has a range of 0 to 10 bar with rear connection via 1/8" pipe thread.
glycerine manometer with range -1/0 bar. Indicator diameter 100 mm with side connection G1/2". Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with 0/250 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....
Panel mounted clamp-on gauges with 63 mm diameter, 0 to 6 bar range and 1/4" pipe thread connection. Compressed pressure measurement for easy attachment to machine panels,...
The MAKP-1V-18 digital pressure gauge has a range of -1 to 0 bar with 1/4" pipe thread rear connection.
The working pressure is 25 bar. Connection is M20 × 1.5. The tap body is made of stainless steel 1.4571.
Panel gauge with front flange, 50 mm indicator with pressure measurement range 0/4 bar with 2.5% deviation. Side connection 1/4". Body made of steel, measuring member and...
The MAKP-1V-18 digital pressure gauge has a range of -1 to 0 bar with rear connection via 1/8" pipe thread.
The working pressure is 25 bar. Connection is G 1/2". The body of the tap is made of brass.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for pressure measurement with a range of 0 to 25 bar. Designed for pressure measurements of...
Rear mount with 90° angle for MAKP digital manometers.
Pressure gauge for technical gas Oxygen with 63 mm gauge and pressure measurement range 0/16 bar with 2.5% deviation. Side connection 1/4". Suitable technical gases are intended...