.png)
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
_(1).jpg)
.png)
.jpeg)
.png)
Read about how compressors work and what parameters to consider when choosing a compressor for your workshop or operation. Article content: How do compressors work? How to proceed when choosing a compressor? Frequency of compressor use Calcula...
Blow gun basic - DN7.2
Free shipping
For purchases over 5,000 CZK
We guarantee
Extended warranty and service
Discount voucher
For every purchase
Return of goods within 30 days
Completely at our expense
Related products
Original parts
–10 %
Basic nozzle
Basic nozzle GN-B with centrally located 1.5 mm diameter hole. Concentrated...
Original parts
–10 %
Silenced nozzle M12x1.25
The GN-S soundproof nozzle is equipped with a sintered bronze inner liner...
Original parts
–4 %
Injector nozzle made of polyamide M12x1.25
GN-IP polyamide injector nozzle with extreme performance by drawing and...
Original parts
–5 %
Injector nozzle made of aluminum M12x1.25
GN-IA aluminium injector nozzle with extreme performance by drawing and...
Original parts
–5 %
Nozzle with air shield M12x1.25
GN-T air shield nozzle equipped with a night drilling system that splits...
Original parts
–5 %
Soundproof safety nozzle M12x1.25
Soundproof safety nozzle GN-SF combines the safety nozzle function with the...
Original parts
–9 %
Extended nozzle M12x1.25
Extended and curved GN-L nozzle for improved handling and reach during...
Original parts
–4 %
Extended nozzle with rubber protection M12x1.25
Extended curved nozzle GN-LG for improved handling and reach during blowing...
Original parts
–5 %
Extended nozzle with noise reduction and safety M12x1.25
Extended curved nozzle GN-LSF for improved handling and reach during...
Original parts
–4 %
Straight long nozzles 115 - M12x1.25
GNL-115 straight long nozzles with straight profile for improved handling...
Original parts
–5 %
Straight long nozzles 165 - M12x1.25
GNL-165 straight long nozzles with a straight profile for improved handling...
Original parts
–5 %
Straight long nozzles 265 - M12x1.25
Straight long nozzles GNL-265 with straight profile for improved handling...
Original parts
–5 %
Straight long nozzles 415 - M12x1.25
GNL-415 straight long nozzles with straight profile for improved handling...
Original parts
–5 %
Straight long nozzles 800 - M12x1.25
GNL-800 straight long nozzles with straight profiles for improved handling...
Original parts
–4 %
Bent long nozzles 110 - M12x1.25
Curved long GNLB-110 nozzles with straight profiles for improved handling...
Original parts
–5 %
Curved long nozzles 160 - M12x1.25
Curved long GNLB-160 nozzles with straight profiles for improved handling...
Blow gun type BG269L-ES made of die-cast aluminium
- robust all-metal blow gun with die-cast aluminium body, traditional design, lever control
- body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 - nozzle series
- use in demanding professional and industrial applications
Technical parameters
| Category: | Blow guns for compressed air |
|---|---|
| Pressure: | 10 bars |
| Connecting: | Nipple DN7.2 |
| Material: | Cast aluminum |
| Nozzle material: | Aluminium |
| Medium: | Compressed air |
| Nozzle opening: | 1.5 mm |
| Flow rate at 6 bar: | 120 l/min |
| Temperature: | -15/+80°C |
| Jet: | Basic |
| Nozzle thread: | M12 x 1.25 |
| Nozzle length: | 30 mm |
| Minimální tlak: | 2 bar |
News Overload
We select articles from our advice room
How to properly select and use a compressor?
Be the first who will post an article to this item!
Be the first who will post an article to this item!
 |
100 years of experience and global exports
Emil Wolf founded the company EWO in 1914, at that time it focused on equipping workshops and manufacturing companies. The company then experienced a major change successively in 1939, 2002 and 2006. However, each time it is about changes that move the business forward and towards its customers. Even after more than a century of existence, the company EWO has not lost its innovative pace, and modern technologies and continuous research are key factors in the company's success. As a result, it now exports its products to more than 60 countries on five continents, thanks to an extensive distribution network. In the factory near Stuttgart, Germany, around 80 employees are responsible for the production of compressed air treatment units, workshop and tire service equipment, autogenous technology and accessories, and special high-pressure applications.
EWO in the workshop and at the gas stationThe products of the company EWO will satisfy the needs of both large industrial companies and smaller tradespeople or DIYers. The EWO brand can be found at many gas stations, car service stations, or workshops. In the automotive sector, you can find classic tire inflators, pressure gauges, various types of nozzles and a wide range of pressure regulators - all of which can be found in our online shop Compressors Air. |
 |
Similar products
Tip
–4 %
Blown guns ABG-30
The range of blow guns in all-metal design, variant with standard nozzle...
–4 %
Forged blow gun basic - DN7.2
Robust all-metal blow gun with forged aluminium body, extremely resistant...
–5 %
Forged blow gun basic with reduction - DN7.2
Robust all-metal blow gun with forged aluminium body, extremely resistant...
Tip
–4 %
Blow gun ABGP-100 blue
Simple blow gun with blue plastic body and 100 mm metal nozzle for common...
Tip
–5 %
Blow gun BG470-ES
Lightweight blow gun with hardened polyamide body for long life. It is...
–10 %
Blow gun ABGP-20 red
Simple blow gun with red plastic body and 20 mm metal nozzle for common DIY...
–9 %
Blow gun ABGP-100 red
Simple blow gun with red plastic body and metal extended nozzle length of...
New
Tip
–4 %
ABG03-B Plastic Blow Gun
The ABG03-B compact blow-off gun features a short nozzle (30 mm) for...
–4 %
Blower cock extended AHL/IL - G3/8" - without nozzle
Robust blow-off taps for easy holding on the job and for continuous use in...
.svg?676e60b7)
