Pneu and Aku tools with gun technology, Page 4
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Bestsellers
The professional tyre inflator with Ø80 mm pressure gauge offers a convenient pressure reading thanks to the clear double bar/psi scale. It is equipped with a rear connection,...
The professional tyre inflator with Ø80 mm pressure gauge offers a convenient pressure reading thanks to the clear double bar/psi scale. It is equipped with a rear connection, a...
GN-IA aluminium injector nozzle with extreme performance by drawing and drawing air from the ambient atmosphere into the air stream of the gun. Aluminium design for higher...
Basic tyre inflator TG01 for easy filling of compressed air into tyres of cars, motorcycles, bicycles etc. Spare parts and accessories for tyre inflators, valves, needle valves,...
Professional tyre inflator with 63 mm diameter gauge for inflating dual tyres on trucks. Otwo-way valve with extension
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 27 mm screws.
Hose 300 mm long with base valve as accessory for the TG-09 wheel inflator. Connection of the hose with G1/4" thread.
Pneumatic inflator with digital monochrome display. Eyelet for hanging above the work surface. Tightening by lever, venting by button on the side of the gun. Connection via...
Spray gun with upper container and 1.8 mm nozzle for painting with the possibility of adding different nozzle sets. Regulation of the colour and shape of the beam. Spray guns...
Miniature pressure regulators designed for direct mounting on 1/4" threaded blow gun inlets. They provide a constant output pressure of 6 bar and significantly reduce the cost...
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a safety extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5...
The 2.5 mm nozzle set for SGHX100 APS is designed for extremely viscous materials such as thixotropic materials, sealants, resins and heavy fillers. Ensures maximum paint flow...
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 75 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 13 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 8 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 30 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 20 mm screws.
Spray gun with upper container and 1.5 mm nozzle for painting with the possibility of adding different nozzle sets. Regulation of the colour and shape of the beam. Spray guns...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
The inexpensive blast gun is used to remove rust from metal surfaces by blasting with special sand with grains up to 0.8 mm, designed for blasting smaller areas. Design with...
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 23 mm screws.
Basic accessories for Minipaint HVLP spray gun. Upper container, plastic, 250 ml.
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 250 mm for nuts with 3/4" square clamping. The outer square is equipped with a...
The 0.5 mm nozzle set for SGH1000 HVLP is designed for extra fine painting of small parts, detailed decorations or labels. Ideal for very thin materials - stains, varnishes,...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 40 mm screws.
Spring balancer for suspension of pneumatic tools with a load capacity of 1.5 to 3.0 kg and a stroke of one metre.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 26 mm screws.
63 mm pressure gauge with protective rubber as a replacement for the TG-09 compressed air inflator.
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a safety extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
