Pneu and Aku tools with gun technology, Page 5
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Bestsellers
Straight long nozzles GNL-265 with straight profile for improved handling and reach during blowing. Nozzle length 265 mm.
Simple blow gun with red plastic body and 20 mm metal nozzle for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female thread, air flow...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Lightweight blow gun with hardened polyamide body for long life. Only the gun body without nozzle and connection. Nozzle M12 x 1.5. Air connection 1/4" internal thread. Low...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Simple blow gun with red plastic body and metal extended nozzle length of 200 mm for common DIY and craft use. Suitable for working in tight spaces, connection via 1/4" female...
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 125 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 17 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 27 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 9 mm screws.
Nozzle set 0,5 mm for SGH2000 spray gun.
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Hardened square reducer with a diameter of 25 mm and a height of 38 mm equipped with a ball. Inner square 1/2" with reduction to outer square 3/8".
Balancer type 9340 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 10 - 14 kg. Aluminium body with 2,500 mm lower cable outlet and...
Basic accessories for the Profipaint HVLP spray gun. Strainer for container
Replacement hardened steel nozzle for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
Balancer type 9320 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 1 - 2,5 kg. Aluminium body with 2,000 mm lower cable outlet and...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 17 mm screws.
Accessories for SG990 spray gun. Replacement nozzle set includes nut, nozzle and needle in 1.5 mm nozzle version.
The 1.2 mm nozzle set for SGHX100 APS is ideal for topcoats, clearcoats and fine coatings. It offers precise spraying, uniform coverage and superior results when used with APS...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 0.4 - 1 kg. Aluminium body with lower cable outlet 1600 mm long and...
Robust all-metal blow gun with forged aluminium body and flow control, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Nozzle set 0,8 mm for SGH2000 spray gun.
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 200 mm for nuts with 3/4" square clamping. The outer square is equipped with a...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 19 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 1 - 2 kg. Aluminium body with lower cable outlet 1600 mm long and...
